25
Clearing a Smart Macro 
To clear a previously saved Smart Macro:
1.Press the SETUP button and then press the UP/ DOWN cursor buttons until SMART appears in the display. Press ENT.
2.Press the UP/DOWN cursor buttons until SMART CLEAR appears in the display. Press the ENT button to confirm. CLEAR SMART? appears in the display.
3.Press the Smart Macro button to be cleared (for example, press 1 to clear a Smart Macro stored in the 1 button).
4.A confirmation appears in the LCD. Use the UP/DOWN buttons to select YES (to clear the Smart Macro) or NO (to keep the Smart Macro). Press the ENT button to confirm.
NOTE: If you attempt to clear unprogrammed Smart Macro button, the word EMPTY appears and the remote returns to normal mode.
Changing a Smart Macro 
To change a previously saved Smart Macro:
1.Press the SETUP button. Then, press the UP/ DOWN cursor buttons until SMART appears in the display. Press ENT.
2.Press the UP/DOWN cursor buttons until SMART EDIT appears in the display. Press the ENT button to confirm. EDIT SMART? appears in the display
3.Press the Smart Macro button to be changed (for example, press 1 to change a Smart Mac- ro stored in the 1 button).
4.Use the UP/DOWN buttons to select the STEP
# you wish to change, for example STEP 10. Press the ENT button to confirm.
5.When the CHG TO ? prompt appears, press the new command button for that step.
6.Repeat steps 5 and 6 to change any other commands, then press the SETUP button.