23
NOTE: The RR-1060 has enough memory to learn 600 commands. If the memory capacity is reached, the LCD displays FULL when you attempt to learn a command.
Multi-Step Button Learning 
The five buttons labeled SCAN, PTY, P-TUN, TP, TA provide a special option – the ability to learn up to three different commands on a single but- ton. During operation, the first command is sent when the button is pressed once, the second com- mand is sent the next time the button is pressed, and the third command is sent the third time the button is pressed.
To program a multi-step button using the SCAN button as an example:
1.Follow the first five steps under “Learning Commands” in the previous section (pressing the desired SCAN button instead of a COM- MAND button in Step 4) to program the first command for the SCAN button.
2.Press the SCAN button a second time. “S1-2” shows in the display. Press and hold the next button on the original remote until the “OK!” confirmation appears.
3.To learn a third command, press the SCAN button a third time. The display shows “S1-3” indicating that it is ready to learn the third command. Press and hold the next command button on the original remote until the “OK!” confirmation appears.
NOTE: To change the programming of any com- mand for a multi-step button, it is necessary to start over beginning with the first command.
