Complete Guide to Operating the Rotel RR-1060 Universal Remote

Operating the RR-1060

This section of the manual explains the basic operation of the RR-1060 and most of its stan- dard features.

NOTE: The AUD DEVICE/INPUT button of the RR-1060 is pre-programmed with control codes for Rotel A/V receivers or surround sound proces- sors. The V1 button is pre-programmed to operate Rotel DVD players. The CD button is pre-pro- grammed to operate Rotel CD players.The other DEVICE/INPUT buttons (TUN, TAPE and V2 – V5) are unprogrammed. You must program or learn commands for these DEVICE/INPUT buttons.

Sending IR Commands

Instead of putting down one remote and pick- ing up another, you simply press a button on the RR-1060 to convert it from the remote control for your CD player to the remote control for your TV set. Here’s how:

1.Press a DEVICE/INPUT button (for under one second) to activate the command set for the desired component. For example, press the AUD button to control a Rotel surround pro- cessor. The label for your selection appears in the display. The selected command set re- mains active until you press a different DE- VICE/INPUT button.

2.Press a COMMAND button to send an IR com- mand to the component you have selected. For example, press the POWER ON button to turn on a Rotel surround processor. The label for the COMMAND button appears in the dis- play. If the label “NO DATA” appears in the display, the button has no learned command for that DEVICE.

NOTE: The default labels that appear in the display match the button labels. You can customize the labels for every DEVICE/INPUT and COMMAND button.

Remember that the COMMAND buttons duplicate controls on many different types of audio/video components. Their function depends on the type of component selected. Make sure that you have pressed the correct DEVICE/INPUT button and use the button labels as guides.