18
1.Press the DEVICE/INPUT button where you wish to program this component’s code (AUD, CD, TUN, TAPE and
2.Press the SETUP button (the LCD displays SET- UP). Press the ENT button to confirm.
3.Press the UP/DOWN cursor buttons until SET- UP MODEL appears in the display. Press the ENT button to confirm.
4.Press the UP/DOWN cursor buttons until the type of component you are searching for ap- pears in the display (AUD, DVD, CD) Press the ENT button to confirm. The first available model number appears in the display.
5.Use the UP/DOWN cursor buttons to scroll through the list until the desired model number appears. Press ENT to confirm the selection.
6.Press any COMMAND button to test the new code. For example, when programming a CD player, you could push the PLAY button to see if the disc begins play. If the command works, press ENT to save the the code selection and return to normal operation.
NOTE: You can press the SETUP button to exit the programming at any time.
Programming by Brand Name 
You can also use the following search method to find and test the code numbers available for your brand of component. When using the brand
search, the DEVICE/INPUT buttons can only be programmed for specific types of components as follows:
AUD: Rotel audio components only
CD: CD players only
TUN: Any component
TAPE: Any component
V1: DVD only
V2: Any component
V3: Any component
V4: Any component
V5: Any component