JVC LPT1092-001A manual Preset Download, Clock Set/Auto Guide Program Number Set

18 EN INITIAL SETTINGS

Preset Download		If you have connected the unit to your TV via a 21-pin SCART
		cable ( pg. 15), the unit will automatically perform Preset
Auto Channel Set By Downloading From TV/Auto		Download instead of the Auto Set Up in step 4 on page 17. After
		downloading, the unit sets the clock and Guide Program numbers
		automatically.
Clock Set/Auto Guide Program Number Set
		● Slide the TV/DVD switch to DVD.
ATTENTION:		● Perform steps 1 to 3 of “Auto Set Up” ( pg. 17) before continuing.
		1 Press rt to select “T-V LINK” and press ENTER. The T-V
You can use this function only with a TV offering T-V Link, etc.* Be
sure to use a fully-wired 21-pin SCART cable.		LINK screen will appear, and the unit automatically performs Auto
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
		Channel Set.
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
		● When Auto Channel Set is
cable. The degree of compatibility and available functions may differ by			INITIAL SET UP
		completed, “PLEASE WAIT” will
system.			INITIAL SET UP / CHANNEL SET
		be displayed for about 90
			AUTO SET
		seconds, since channel data is	T-V LINK
		exchanged between the DVD
		deck and the VHS deck. No
		operation will be done during this		OK
		time.	SET UP		SELECT WITH [CURSORS]
			EXIT	SELECT	THEN PRESS [ENTER]
VHS		ATTENTION:
	DVD
		Preset positions on the front display	INITIAL SET UP
		panel increase from “PR 1”; do NOT	INITIAL SET UP / CHANNEL SET
		press any button on the unit or	AUTO SET
		remote control until the front display	T-V LINK
		panel shows clock time, “PR 1” or “–		PLEASE WAIT...
		–:– –” as illustrated on page 19.
		NOTES:	SET UP	OK	SELECT WITH [CURSORS]
		● For details, refer to the instruction	EXIT	SELECT	THEN PRESS [ENTER]
		manual of your TV.
ENTER		● In the area where no TV station transmits a PDC (Programme
		Delivery Control) signal, the unit can perform neither Auto Clock Set
		nor Auto Guide Program Number Set.
		● If there is a power cut, or if you press 1 or SET UP while
		downloading or set up is in progress, it will be interrupted; be sure to
		turn off the unit power once and try again from the beginning.
		● Auto Clock Set may not function properly depending on the reception
		condition.
		● On this unit, the characters available for station names (ID) are A–Z,
		0–9, –, f, + and I (space). Some names of downloaded stations
		may differ from those of your TV. ( pg. 87)

After “Preset Download” is completed, perform “Monitor Set (DVD Deck Only)” on page 21.

SET UP