JVC LPT1092-001A manual Press rt to input the channel, Number you want to store

	SUBSIDIARY SETTINGS EN 85
Manual Channel Set	1 Press SET UP to access the Main Menu screen.
Store channels that were not stored during Auto Set Up	2 Press w e to select “INITIAL SET UP”, then press t.
	3 Press w e to select “MANUAL CH SET”, then press t. The
( pg. 17), Preset Download ( pg. 18) or Auto Channel Set
( pg. 84).	Confirmation screen appears.
	4 Press rt w e to select a	(Example) To store in position 12.
	blank position in which you want	DVD SET UP		FUNCTION SET UP		INITIAL SET UP
	to store a channel, then press	INITIAL SET UP / MANUAL CH SET
	ENTER twice. The Manual	PR	CH	ID	PR	CH	ID
		01	25	ARD	08	C26	E-SP
	Channel Set screen appears.	02	C08	SKY1	09	55	WEST
	5 Press rt to select “BAND”,	03	10	ZDF	10	C24	SAT1
VHS		04	C65	DAI1	11	C23	OSF
		05	C31	BBC1	12		----
	then press ENTER.	06	C32	BBC2	13		----
		07	C33	3SAT	14		----
		SET UP		OK	SELECT WITH [CURSORS]
		RETURN		SELECT	THEN PRESS [ENTER]
		The programme currently received
		on the selected channel position
		appears behind the confirmation
		screen.
	6 Press rt to change the band	DVD SET UP		FUNCTION SET UP		INITIAL SET UP
	between CH (regular) and CC	INITIAL SET UP / MANUAL CH SET
ENTER	(cable), then press ENTER.		BAND			CH
	7 Press rt to select “CH”, then
			CH			CC
			ID			----
	press ENTER.
			DECODER			OFF

	8 Press rt to input the channel
			FINE
	number you want to store.
		SET UP		OK	SELECT WITH [CURSORS]
	● To enter the registered station	RETURN		SELECT	THEN PRESS [ENTER]
	name ( pg. 97), press rt to
	select “ID”, then press ENTER. Press rt.
	● For fine tuning adjustment, press rt to select “FINE”, then press
	ENTER. Press rt to perform fine-tuning.
	● When storing a channel that sends scrambled broadcasts, press rt
	to select “DECODER”, then press ENTER. Press rt to set
SET UP	“DECODER” to “ON” (“OFF” is the default setting).
	● When “L-2 SELECT” is set to “VIDEO/RGB”, “S-VIDEO/RGB” or

“SAT VIDEO/RGB”, the “DECODER” setting cannot be changed. ( pg. 45)

9 Press ENTER to enter new channel information. The Confirmation screen appears.

● Repeat steps 4 – 9 as necessary.

10 Press SET UP to close the Confirmation screen.

● When Auto Channel Set is completed, “PLEASE WAIT” will be displayed for about 90 seconds, since channel data is exchanged between the DVD deck and the VHS deck. No operations will be done during this time.

● To change positions, see “Change Station Channel Position” ( pg. 86).

● If you wish to set station names other than the ones registered in your unit, see “Set Stations (B)” ( pg. 87).

ATTENTION:

Guide Program numbers are not set when channels are stored manually. ( pg. 83, “SHOWVIEWTM System Setup”)