ADVANCED PLAYBACK EN 59
Advanced Playback (VHS)
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/DVD switch to DVD.
●Press VHS so that the VHS lamp lights up on the unit.
VHS
PR +/–
Clean the video heads using a dry cleaning cassette when:
●Rough, poor picture appears while a tape is played back.
●The picture is unclear or no picture appears.
●“USE CLEANING CASSETTE” appears on the screen (only with “SUPERIMPOSE” set to “AUTO”). ( pg. 79)
NOTE:
The heads get dirty in the following cases:
●in an environment prone to extreme temperature or humidity
●in a dusty environment
●flaw, dirt or mold on video tapes
●continuous usage for a long time
ATTENTION:
In the search, still,
●the picture will be distorted.
●the noise bars will appear.
●there may be a loss of colour.
●you cannot hear the sound.
High-Speed Search
During playback, press 5 for forward
●Each press of the button increases the search speed for each direction.
When pressing 5: (SP): +5x{+7x (LP): +11x{+21x When pressing 3:
Once 3 is pressed, reverse search starts in
(LP):
●To resume normal playback, press 4.
Quick Rewind A Little
During playback, press 
. The unit rewinds the picture a little (about 7 seconds) and resumes playback.
●If the button is pressed repeatedly, the unit rewinds the pictures continuously and resumes playback.
Skip Search
During playback, press 
1 to 6 times to skip over unwanted sections.
●Each press initiates an approximately
●To resume normal playback, press 4.
Index Search
Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of the 9 index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Press 2 or 6 to activate Index Search. “2 1” or “6 1” is displayed on the TV screen and search begins in the corresponding direction.
●To access index codes 2 through 9, press 2 or 6 repeatedly until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press 2 twice.
To locate the beginning of D from the current position, press 6 once.
Current position
Still Picture/Frame-By-Frame Playback
1 Press 9 to pause during playback.
●If there is vertical jitter, press PR +/– to correct the picture.
2Press 9 repeatedly to activate
● To resume normal playback, press 4.
Slow Motion
1 Press 9 to pause during playback.
2 Press and hold 9 for 2 seconds, then release. Press 9 and release again to return to still picture.
●The speed changes for each direction by pressing 3 and 5 repeatedly.
●To resume normal playback, press 4.
NOTE:
During slow motion playback, some noise may appear on the TV screen. Press PR + or – to eliminate the noises.
Index number
●When the specified index code is located, playback begins automatically.