JVC LPT1092-001A manual VHS DVD Cancel Showview Timer Enter Return, Clear

Page 29

TIMER RECORDING EN 29

1 Press DVD or VHS to select the deck on which you want to

SHOWVIEW™ Timer Programming perform timer programming.

2 For DVD deck Load a recordable disc.

You can programme each deck to timer-record as many as 8 programmes up to 30 days ahead.

With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise.

You can use the remote control to enter the SHOWVIEW number.

●Make sure that the unit’s built-in clock is set properly.

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/DVD switch to DVD.

VHS

DVD

0 – 9

CANCEL

SHOWVIEW TIMER

ENTER

RETURN

CLEAR ( )

IMPORTANT:

If you have moved to a different area or if a broadcasting station’s channel number has been changed, the wrong channel number will be displayed on the SHOWVIEW programme screen in step 5. When this happens, set the correct Guide Program number for that station. ( pg. 83, “SHOWVIEWTM System Setup”)

For VHS deck

Load a cassette with safety tab intact.

3Press SHOWVIEW to access the SHOWVIEW screen.

4 Press the number buttons to

SHOWVIEW PRGM

 

 

 

enter the SHOWVIEW number of a

SHOWVIEW NO.

1 2 3 4

 

 

programme you wish to record,

DATE

START

STOP

TV PROG

then press ENTER.

 

 

 

 

● If you have made a mistake, press

 

DAILY/WEEKLY VPS/PDC

REC MODE

CANCEL and input the correct

 

 

 

 

ON

NAME

 

 

 

SP

number before you press ENTER.

1

2

3

OK

ENTER SHOWVIEW CODE WITH [0 - 9] KEYS

● To clear all entered numbers at a

4

5

6

 

THEN PRESS [ENTER]

7

8

9

 

time, press CLEAR (8).

 

0

 

 

 

 

 

 

 

 

●If the number you entered is

invalid, “SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO. THEN RETRY” appears on the TV screen. Input a valid SHOWVIEW number.

●If “GUIDE PROGRAMME IS NOT SET” appears on the TV screen, set Guide Program numbers manually. ( pg. 83)

●When “PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMME” appears on the TV screen, you need to cancel some of the reserved programmes. ( pg. 34)

5The SHOWVIEW number you entered and the matching timer- recording information are displayed on the TV screen. Check the programme data.

● To cancel this setting, press RETURN.

IMPORTANT:

Make sure the channel position number you wish to record is displayed; if not, see “SHOWVIEWTM System Setup” ( pg. 83) and set the Guide Program number correctly.

6 Press w e to select the desired recording option as required. Press rt to select the desired setting, then press ENTER.

●“STOP” (To advance/go back the stop time by 30 minutes, press and hold rt).

●“DAILY/WEEKLY” ( pg. 30, “Weekly/Daily Recording”)

●“VPS/PDC” ( pg. 30, “VPS/PDC Recording”)

●“REC MODE” ( pg. 27, 28, “Recording Mode”)

●“NAME” ( pg. 67, “Modify Title Name”) (DVD deck only)

7 Press ENTER to access the Programme Confirmation screen.

8 Press ENTER to complete timer programming.

●To programme another timer, repeat steps 3 – 8.

●If “PROGRAMME OVERLAPPED” appears on the TV screen, see page 35.

9Press TIMER # to engage the unit’s timer mode. The DVD timer indicator lights up on the unit and the unit is automatically turned off.

Satellite Receiver Users (DVD Deck Only)

To timer-record a satellite broadcast using the SHOWVIEW system:

APerform “SHOWVIEW™ Timer Programming”.

BSet the satellite receiver to the appropriate channel before the selected programme begins.

C Leave the satellite receiver’s power on.

NOTES:

●To disengage the timer mode, press TIMER # again.

●There may be cases that the SHOWVIEW Timer Programming function prolongs the stop time of the programming.

●When two successive programmes are recorded on a DVD-RW disc with the SHOWVIEW Timer Programming function, the beginning of the second one may be left off the recording.

●SHOWVIEW Timer Programming is not possible on the discs used exclusively for On-Disc Timer Programming.

●If the copy limited programme is received during timer-recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programmed.

●To record the programmes received by the satellite receiver, record on the DVD discs. For details, refer to “Satellite Receiver Users (DVD Deck Only)” above.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DR-MV5SE DR-MV5BE Mains outlet Safety PrecautionsDo not place the unit For ItalyDo not block the unit’s ventilation openings or holes To mobile phone usersEnjoy the vivid picture quality DVD recording/playback Enjoying your life withRecorder Recordable/Playable Discs About DiscsDiscs For Playback Only DVD-RAM DiscsUnplayable Discs Recording Medium And FormatFile Structure Of Discs Region NumberAudio CD/Video CD/Super Video CD Svcd DVD Video MarksJPEG/MP3 Disc CD-R/RW/ROM Marks related to videoCare And Handling Of Discs Placing a DiscRear View Front View pg Remote ControlHow To Use On-Screen Display DVD deck On-Screen Display VHS deck C D EFG H I J K L M N Front Display PanelLuminance brightness ConnectionsComposite Connection Component Video Connection DVD deck only EN GET Over IT! ConnectionsSET UP Auto Set UpNumber Set VHS DVDClock Set/Auto Guide Program Number Set Preset DownloadLink Functions DVD Deck Only On The Front Display PanelVHS LanguageMonitor Set DVD Deck Only VHS DVD Enter SET UPPan&Scan/Letter Box Pan&ScanPlayback About recording modeWant to do? Load a disc Basic Playback DVDCompact VHS camcorder recordings can be played on this Basic Playback VHSUsable cassettes Load a recordable disc Basic Recording DVDMode Approx Time approx Recording ModeRecording Resume Function Recording Recording amountBasic Recording VHS Maximum Recording Use Mode Time ApproxSatellite Receiver Users DVD Deck Only VHS DVD Cancel Showview Timer Enter ReturnClear VPS/PDC Recording Weekly/Daily RecordingFor DVD deck Manual Timer ProgrammingDVD Timer To Make The Disc For On-Disc Timer Programming On-Disc Timer Programming DVD DeckOnly Satellite Receiver UsersHow Discs Are Overwritten To cancel the programme Check, Cancel And Change ProgrammesSAT RtweCancel Prog Enter When Programmes Overlap Each OtherPress Cancel To change the programme settingSAT REC ModeRecording DVD Deck Only Stop and pause mode on the DVD deck Auto Recording Mode OptimizerTo DVD Auto Title Creation DubbingVHS/DVD VHS Dubbing Dubbing a Part Of a CassetteVHS/DVD Dubbing REC Mode Progressive ScanDubbing An Entire Disc PR + Enter REC Mode Progressive ScanDubbing a Part Of a Disc DV Dubbing DVD Deck Only Performing dubbing without using the DV Dubbing controllerPanel If the camcorder has no S-VIDEO output connectorEdit From a Camcorder When using your unit as the recording deck When using your unit as the source playerOutput/Input Set Output And L-1 Input SettingInput Setting Select SettingExample Dubbing to an MD Digital Audio DubbingDVD TOP Menu Enter Advanced Playback DVDHigh-Speed Search Still Picture/Frame-By-Frame Playback Resume FunctionSlow Motion Skip SearchSubtitle Selection Checking The Time Information Angle SelectionSelection display appears Audio Channel SelectionPress Audio or w e to select Your desired audio language SoundDisplay Recording/Playback Status DisplayRecording screen Overview Of Live Memory PlaybackDisplay During Live Memory Playback While Recording Available only when pausedTo Watch a Programme Previously Recorded While Recording Buttons To Be Used During Live Memory PlaybackHow To Access The On-screen Bar Using The On-screen BarBasic Operation On The On-screen Bar Enter NavigationEnter On Screen Clear Repeat PlaybackAdjusting The Picture Quality Setting The Progressive ModeTime Search If you have specified a wrong selectionSelect The Switching Interval Of The Slide Show Cancel EnterRandom Playback Programme PlaybackAdvanced Playback VHS Clean the video heads using a dry cleaning cassette whenQuick Rewind a Little Index SearchManual Tracking Next Function MemoryVHS Progressive Scan Soundtrack SelectionAdvanced Recording DVD Instant Timer Recording ITRElapsed Recording Time And Disc Remaining Time Indication DVD TV/VIDEOSelection Of The Audio Channel To Be Recorded On a Disc Select FR Just in a recording mode selection procedureFree Rate Function Elapsed Recording Time Indication Advanced Recording VHS0000 Accidental erasure preventionTo Record Stereo and Bilingual Programmes A2 Tape Remaining TimeTo Record Nicam Stereo and Bilingual Programmes PlaybackIcons and their meanings Library Database DVD NaviDisplay for original Display for play list Recording Memo Enter Navigation Scan For Beginning Of TitleModify Index Modify Category Modify Title NameDelete Title Delete Unwanted Part Of The TitleAdd Scenes To a Play List Modify Play List InformationCreate Play List MemoSCENE, then press Enter Move ScenesDelete Play List Play Back Play ListModify Play List Name Press 8 to stop playbackScan For Title From Library Modify Library InformationRegister Disc Delete InformationFor MP3 Playback Locating The Desired Group And TracksFor Jpeg Playback On completion of the playback of all the itemsTips for your trouble Specifications Remote control settingFor better sound For DVD operations For VHS operations FormatRemote Control 1/2/3/4 Code Switching Remote Control FunctionsEnter SET UP For 4 to change the remote control code, then press EnterBrand Name Code TV Multi-Brand Remote ControlPin AV input Scart connector Has two 21-pin AV input Scart connectorsIN/DECODER connector to the satellite receiver’s connector Perfect Connections RecommendedProgramme Connecting/Using a Decoder DVD Deck OnlyWhen you can’t switch the audio channel of a bilingual Utility  pg Mode Set DVD DeckOthers  pg REC, then press EnterRecording SET PAL To record PAL signals Secam To record Secam signalsOFF You cannot use the resume function Scan Mode SetThen press Enter Press rt to select the desired Mode Set VHS DeckVHS Enter For Example Tray Lock DVD Deck OnlyTo lock tray To unlock trayGuide Program Number Showviewtm System SetupGuide Program Number Set Auto Channel Set Tuner SetNumber you want to store Press SET UP to close the Confirmation screenPress rt to input the channel Delete a Channel Press SET UP twice to close the Confirmation screenChange Station Channel Position Press rt w e to select the new channel position, then pressFine-Tuning Channels Already Stored When Receiving a Scrambled Broadcast DVD Deck OnlySet Stations a Set Stations BJust Clock Clock SetFormat a DVD-RAM Disc Format a Disc DVD Deck OnlyFormat a DVD-RW Disc Then press tDVD Enter After finalising For DVD-R/RW Video mode discsFinalise a DVD-R/RW Disc General Playback DVD DeckInitialising DVD Deck Only Playback VHS Deck Timer Recording DVD DeckRecording DVD Deck Recording VHS DeckOther Problems Timer Recording VHS DeckFor composite connection For component video connectionDuring Live Memory playback, 8 has been pressed.  pg Timer recording has finished during Live Memory playbackAn invalid Showview number has been input.  pg Power consumption Power requirementTemperature Dimensions WxHxDLanguage Code List TV Station And ID List When Programmes Overlap Each Other Select The Switching Interval Of The Slide ShowAudio Language/Sound Selection Elapsed Recording Time IndicationMemo EN DR-MV5BE
Top Page Image Contents