30 EN | OPERATIONS ON DVD DECK |
Basic Playback
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/VCR/DVD switch to the right.
ATTENTION
●You can not use the DVD deck when the VHS deck is in the Automatic Satellite Programme standby and recording mode.
●You can use the DVD deck when the VHS deck is in the timer standby mode.
To play back an MP3/JPEG disc, see pages 48 – 53.
A Load the disc.
APress x on the DVD deck to open
the disc tray.
● The unit’s power comes on automatically.
B Place the disc in the disc tray.
● For details, refer to “Placing a Disc” ( pg. 5).
CPress x on the DVD deck to close the disc tray.
● Pressing 4 also closes the disc tray.
● Playback begins automatically if an
B Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator lights up.
On the remote control
Press DVD so that the DVD indicator lights up.
C Start playback.
Press 4.
Example: DVD VIDEO
Title number Chapter number Elapsed time
●It may take a few seconds to start playback.
●If you load a DVD disc whose region code does not match the
DVD deck, “REGION CODE ERROR!” appears on the TV screen. For details, refer to “Region Number” ( pg. 4).
●With Video CD discs with PBC control or some DVD discs, the menu display may appear on the TV screen after starting playback. In this case, select an item which you want to play back from the menu. Otherwise, the playback cannot go
forward. Refer to “Locating a desired scene using the menu of a Video CD with PBC” ( pg. 31) or “Locating a desired scene using the DVD menu” ( pg. 31).
D Pause playback.
Press 9.
●To resume normal playback, press 4.
E Stop playback.
Press 8. Press x on the DVD deck to open the disc tray, then remove the disc.
●Pressing 4 resumes playback from the position where you stopped playback. For details, see “Resume Function” on page 32.
NOTE:
When you press x while the unit is turned off, the unit’s power comes on and the disc tray opens automatically.