|
|
|
|
| EN 67 |
|
|
|
|
|
|
Playback discs |
|
| Output |
| |
|
|
|
|
| |
STREAM/PCM |
| DOLBY DIGITAL/PCM |
| PCM ONLY | |
|
|
| |||
|
|
|
|
|
|
DVD VIDEO with |
|
|
|
|
|
48 kHz, 16/20/24 bit linear |
|
| 48 kHz, 16 bit linear PCM |
| |
PCM |
|
|
|
|
|
|
|
|
|
| |
DVD VIDEO with DTS | DTS bitstream |
| 44.1 kHz, 16 bit stereo linear PCM | ||
|
|
|
|
|
|
DVD VIDEO with Dolby | Dolby Digital bitstream |
| 48 kHz, 16 bit stereo linear | ||
Digital |
| PCM | |||
|
|
|
| ||
|
|
|
|
| |
Audio CD/Video CD |
| 44.1 kHz, 16 bit stereo linear PCM |
| ||
|
|
|
|
| |
Audio CD with DTS | DTS bitstream |
| 44.1 kHz, 16 bit stereo linear PCM | ||
|
|
|
|
|
|
MP3 disc |
|
| Linear PCM |
| |
|
|
|
|
|
|
NOTES:
●The unit is not equipped with the DTS decoding function.
●When you play back a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. Never use the unit’s analog output connectors, which output incorrect signals that may damage your speakers.
●If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier connected to the analog outputs to minimum.
Others Settings
8RESUME — ON / OFF / DISC RESUME
When this function is set to “ON”, you can use the resume function. ( pg. 32)
ON: You can start playback from the resume point of the placed disc.
OFF: You cannot use the resume function.
DISC RESUME: The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected.
NOTE:
This function is not available for Audio CDs and MP3 discs.
8ON SCREEN GUIDE — ON / OFF
When this function is set to “ON”, the unit can display “on- screen guide” icons or characters which show the conditions of the unit or disc.