JVC HR-XV3E manual Access the Video Channel Set mode, Set the RF output system

Page 73

EN 73

Video Channel Set

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the unit through the RF cable.

IMPORTANT

Perform the following steps only if —

—Video Channel Set has not been done correctly by the Auto Set Up function ( pg. 10),

—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area.

—you change the connection between your unit and TV from RF connection to AV connection, or vice versa.

If you have connected the unit to your TV via the AV connection ( pg. 9), since you do not need the video channel you have to set the video channel to off.

If you have connected the unit to your TV via the RF connection ( pg. 9), you have to set the correct video channel.

Before performing the following steps:

●Make sure there is no cassette inserted in the unit.

●Press VCR/DVD on the unit or VCR on the remote control so that the VCR indicator lights up, then press 1 to turn off the unit.

A Access the Video Channel Set mode.

Hold down 8 on the unit until the front display panel shows the following.

B Set the RF output system.

The blinking number on the display indicates the RF output system of your country.

●If you have selected MAGYARORSZÁG, CESKÁ REPUBLIKA,

POLSKA or OTHER EASTERN EUROPE for the country setting ( pg. 10, 15), press rt to set to “2”.

●For other countries, set to “1”. Then press OK. (1: B/G 2: D/K)

C Set the video channel.

With AV Connection

Press PR – until the front display panel shows “1 CH – –” (or “2 CH – –”).

●Now the video channel is set to off.

With RF Connection

Press PR + or – to set the unit to a vacant channel between 22 and 69 which is not occupied by any local station in your area.

(Example) If channel 50 is available in your area

Then set your TV to UHF channel 50.

●If the two vertical white bars appear clearly on the TV screen as shown to the right, go to step D.

●If the two vertical white bars do not appear clearly, re-set the unit to another vacant channel and try again.

NOTES:

●If you set the unit to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 22 and 69, consult your JVC dealer.

D Exit the Video Channel Set mode.

Press OK on the remote control.

With AV Connection

To view picture signals from the unit, set your TV to its AV mode.

With RF Connection

The channel on which the TV screen in step C appears clearly is your video channel.

To view picture signals from the unit, set your TV to the video channel.

Page 72 Page 74
Image 73
Page 72 Page 74
Contents HR-XV3E Use only discs marked with the following Safety PrecautionsFor Italy Contents Playable Discs About DiscsUnplayable Discs Region NumberCare and Handling of Discs File Structure of DiscsPlacing a Disc Place the discInfrared Beam Receiving Window M Front Display Panel pg Front ViewTape Remaining Time Indicator  pg Mode Display L-1, L-2, F-1 or SAT DVD Mode IndicatorCassette Loaded Mark On the tape BeginningEndHow To Use Remote ControlBasic Connections Check the contentsSituate the unit Connect the unit to TV10 EN Auto Set UpTurn on the unit Select your countryConfirm/Set video channel Perform Auto Set UpOn the front display panel Press rt to select Auto and press OK or ePerform Preset Download Preset Download12 EN Set the video channelLink Functions Monitor Set 14 ENDVD deck Press VCR so that the VCR indicator lights up Access the Country Set screenLanguage Select the VHS deck16 EN Access the DVD Set Up menu screenLanguage Press rt to move H to on Screen LANGUAGE, then press OKLanguage Code List Basic Playback 18 ENPlayback Features Instant ReView 20 ENRepeat Playback Manual TrackingBasic Recording Instant Timer Recording ITR Recording Features22 EN Tape Remaining TimePlayback Receiving Stereo and Bilingual ProgrammesRecording 24 EN Showview Timer ProgrammingVPS/PDC Recording Engage the unit’s timer modeSatellite Receiver Users Repeat steps B G for each additional programme26 EN Express Timer ProgrammingAccess the Programme Check screen Disengage the timer modeCancel or change a programme Return to the timer mode28 EN Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeBefore performing the following steps Set L-2 Select to A/V or SAT.  pgLoad the disc 30 ENPause playback Access the PBC menu Locating a desired scene using the DVD menuAccess the DVD menu Locating the start point of the item or skip the itemResume Function 32 ENMemorize a resume point Resume playbackZooming 3D Phonic Access the selection menuSelect the effect level 34 EN VFP function Adjusting the picture qualitySelect the option Access the on-screen bar36 EN Select the repeat modeChange the time information Select the menu itemWhen using the Repeat button Access the repeat modeTo cancel A-B Repeat Playback Select the start pointTime Search 38 ENChapter Search Programme Playback To clear the programme table Press Play SetupSelect the tracks in the desired order 40 EN Access the menuRandom Playback Subtitle SelectionSelect the view angle Angle SelectionPress Angle 32/33/3Back to the beginningAudio Language Selection When using the A.MONITOR buttonSelect the audio language Press A.MONITORSelect the audio channel Audio Channel SelectionFor Video CD For SvcdParental Lock 44 ENTo temporarily release the Parental Lock To change the settings46 EN Country/Area Code List for Parental LockPage 48 EN What is MP3?About MP3 Disc MP3 control displayMP3 Playback Using the MP3 control displaySelect the group Press w e to select the desired groupGroup/track selection 50 ENTo start playback by specifying the group/track number To return to the MP3 control displayAbout Jpeg Disc What is JPEG?Jpeg control display 52 EN Using the Jpeg control displayJpeg Playback Press rt to select the desired file, then press OK orZooming Group/file selectionTo return to the Jpeg control display 54 EN Engage the Record Pause mode of the recording deck Set the input mode of recording deckStart the source player Start the recording deckDubbing 56 ENFrom DVD to VHS Place a disc and load an MD Select the input modePrepare the audio device for dubbing For the digital audio device58 EN Set the TV brand code TV Multi-Brand Remote ControlOperate the TV 01, 23, 2460 EN Connecting To a Satellite ReceiverSimple Connections Perfect ConnectionsMake connections Select the input modeConnect the decoder Set the tunerAccess the Main Menu screen Mode Set VHS deckAccess the Mode Set screen 62 ENFor Example When you use the Direct Rec function, be sure to use a TVAbout Ntsc Playback 64 ENFor each mode setting, see pages 66 to Mode Set DVD deckOthers Press rt to move H to RESUME, then press OKAudio Settings Picture Settings66 EN Video Normal / Video Active / Film / AutoPlayback discs Others SettingsDigital Audio CD/Video CDTuner Set 68 ENAuto Channel Set Perform Auto Channel SetManual Channel Set 70 EN When Receiving a Scrambled BroadcastDelete a Channel Set Stations B Set Stations aTV Station And ID List 72 ENExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set Set the RF output systemClock Set 74 ENChild Lock You can disable the unit’s operationSet the Child Lock Tape Transport VHS deck 76 ENPlayback VHS deck Playback DVD deckJpeg Playback DVD deck MP3 Playback DVD deckRecording VHS deck Scene is not recorded from multiple angles78 EN Timer Recording VHS deckDVD PAL80 EN Link Operations on VHS Deck82 EN Page HR-XV3E
Top Page Image Contents