JVC HR-XV3E manual Set the Child Lock, You can disable the unit’s operation

EN 75

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option can be set “ON” or “OFF” at the Clock Set screen (the default setting is “OFF”). Press OK until the Just Clock setting begins blinking, then press rt to change the setting.

IMPORTANT: If you turn off Just Clock, the accuracy of your unit’s built-in clock may be reduced, which could adversely effect timer recording. We recommend you to keep Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to keep Just Clock set to “OFF”.

NOTES:

●Just Clock (when set to “ON”) adjusts the unit’s built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when:

—the unit’s power is on.

—the unit is in the Timer mode. (VHS deck only)

—a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

—the unit is in the Automatic Satellite Programme Recording mode. ( pg. 28) (VHS deck only)

—the unit is in the Power Save mode. ( pg. 64) (VHS deck only)

—“L-2 SELECT” is set to “SAT”. ( pg. 64) (VHS deck only)

●If Just Clock is set to “ON”, the unit’s clock is automatically adjusted at the start/end of Summer Time.

●Just Clock may not function properly depending on the reception condition.

Child Lock

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

You can disable the unit’s operation.

A Set the Child Lock.

Press and hold 1 on the remote control for more than 10 seconds while the unit is turned on. The unit turns off, and “CL“ appears on the front display panel.

●To release the child lock, press and hold 1 on the remote control until the unit turns on.

NOTES:

●When the child lock function is in use, keep the remote control out of the children’s reach.

●Timer recording programmes will be performed even if the child lock function activated.