Specifications |
6.Press YES 
to confirm the selection and save the settings or click EXIT 
to exit.
Note: When you enter the Manufacture Code and an 'ERROR’ message is displayed, it could be for two reasons:
1.That code number doesn't exist in the Manufacture Code table yet.
2.That code number is not in the range of the Manufacture Code table reserved for the default device screen
Selecting a Code Automatically
1.Turn on the target device you want to control.
2.Press the device hardware button (for example TV).
3.Point the
Press the AUTO button. An “OK” message displays while the 
or AUTO key to stop the automatic search.
The last tried code is displayed in the upper 
.
If it doesn't work, you may need to press the tuning down key 
and try a few of the previously scanned codes.
4.Press YES 
to confirm and save the settings or EXIT 
to exit.
Using the Learning Mode
Follow these instructions to detect and learn a remote control's configuration.
Before Using the Learning Function
Before you start using the
•Not all infrared codes are learnable by the
•To change from a device that has already been programmed, delete all of the commands for the first device before teaching new ones. For example, to operate the living room TV instead of the bedroom TV, delete all commands for the bedroom TV first. Then
Code learning does not work with all devices. Select one device screen in advance before using code learning mode. All keys except the quick channel keys, sleep, page and macro can be learned.
13