Sima Products SUR-47 user manual Using Pre-Code to Program Devices, Manually Selecting the Code

Getting Started SUR-47 User’s Manual

Using Pre-Code to Program Devices

Follow these instructions to program a device using preprogrammed codes.

Press or to select PRE-CODE，and then press OK.

Manually Selecting the Code

1.Turn on the device you want to program the SUR-47 to control.

2.Select the device (for example TV).

3.Check the preprogrammed code list that was bundled with the SUR-47 for the four- digit code number of your device. If no code is displayed, that means this device has no pre-code.

4.Enter the four-digit code number and press YES button to confirm the entry. Note: If the code only has one digit (for example, 0001), you do not have to input the preceding zeros; in this example, press ‘1’.

5.Press the POWER button to test the code. The device you are trying to control should turn on (or off) as you press this button. If not, return to Step 2 and try another code.

You can also press or to decrease or increase the four-digit code number.

Note: Some codes are designed to operate more than one model. It may take several tries to find the code that works with your unit.

12