Sima Products SUR-47 user manual Appendix B Accessories, PC Interface Kit SUR-PC

Accessories SUR-47 User’s Manual

Appendix B - Accessories

PC Interface Kit – SUR-PC

The SUR-PC is an optional link cable that enables transmission of system setup to a personal computer or another SUR-47. The following information can be transferred using the TRANS selection in the setup menus:

•PROGRAM – MCU Program

•PRE-CODE – Preprogrammed Code only

•MEMORY – All Flash Memory Data (Pre-programmed Codes included)

Please refer to the SUR-PC manual for instructions on using the cable.

IR Blaster Cable – SUR-IR

The IR Blaster Cable is an optional 6 ft. cable with an IR emitter on one end. It enables the base unit to send signals to a device that would not be within its normal directional range. A device can be operated by aiming the cable at the device or placing it directly onto the device.

Additional RF Base Unit – SUR-BU

The RF Base Unit receives the RF signal sent by the SUR-47and then	sends the
appropriate IR signal to the desired device. The SUR-BU should be	aimed at the
equipment you want to operate. It has 10 RF address settings that	correspond
to settings selected in the SUR-47. Additional base units can be placed	throughout
the house.

34