Insignia NS-FSDVDR manual Playing a DVD formatted in Video or VR mode, Controlling disc playback

Insignia NS-FSDVDR DVD recorder

5Press OPEN/CLOSE to close the disc tray. Your recorder reads the DVD. This may take a while.

If the Video mode DVD has been finalized, the following screen opens:

6If the disc does not automatically start playing, press PLAY .

Playing a DVD formatted in Video or VR mode

To play a DVD formatted in Video or VR mode:

1Turn on the TV and your recorder.

2On the TV, select the video source that your recorder is connected to. For a list of common video sources by TV brand, see “TV video input sources” on page 12.

3Press OPEN/CLOSE to open the disc tray.

4Insert a DVD into the tray with the label facing up.

5Press OPEN/CLOSE to close the disc tray. Your recorder reads the DVD. This may take a while.

6Press TOP MENU to open the DVD title menu.

If the DVD is formatted in Video mode, the following menu opens:

Title List

1 2 3

JAN/ 1/06 1:00AM CH12 XP

4 5 6

If the DVD is formatted in VR mode, the following menu opens:

Playlist
1	2	3
JAN/ 1/06 1:00AM CH12 XP
4	5	6

Title Menu

1	JAN/22/06 12:55AM CH10	XP
2	JAN/30/06 11:00PM CH8	XP
3	FEB/10/06 9:00PM CH10	LP
4	FEB/28/06 11:00AM CH6	LP
5	FEB/28/06 10:00PM CH8	EP

Note

If the DVD is formatted in VR mode, you can press MENU/LIST to toggle between the list of original recordings or the playlist of recordings.

7Press or to select the title you want to play, then press ENTER or PLAY .

8If you pressed ENTER in the previous step, press or to select Play, then press

ENTER.

9To stop playback, press STOP .

10Make sure that you remove the disc before you turn off your recorder.

Controlling disc playback

To control disc during playback:

•To pause playback, press PAUSE . Press PLAY to resume playback.

•To stop playback, then resume playback at the point where you stopped, press STOP , then press PLAY when you are ready to start playback.

•To stop playback and start playing at the beginning of the DVD, press STOP twice, then press PLAY .

•To fast-forward, press FWD . Each time you press this button, the fast-forward speed increases from 2× to 20× to 40×. For CDs, the fast-forward speed is 8×.

•To fast-reverse, press REV . Each time you press this button, the fast-reverse speed increases from 5× to 20× to 40×. For CDs, the fast-reverse speed is 8×.

•To skip commercials, press CM SKIP. Each time you press this button, the DVD skips forward 30 seconds. You can skip forward a maximum of 180 seconds (6 button presses).

•To play forward step by step or frame by frame, press PAUSE , then press SKIP . Each time you press SKIP the DVD advances one step or frame. Press PLAY to resume normal playback.

•To play backward step by step or frame by frame, press PAUSE , then press SKIP . Each time you press SKIP the DVD reverses one step or frame. Press PLAY to resume normal playback.

•To play forward slowly, press PAUSE , then press FWD . Each time your press this button, the slow-forward speed increase from 1/16× to 1/8× to 1/3×. Press PLAY to resume normal playback.

www.insignia-products.com 17