Insignia NS-FSDVDR manual Sound

Insignia NS-FSDVDR DVD recorder

Problem	Solution	Sound
Picture has noise or snow.	• The disc is dirty or flawed.
		Problem	Solution
	Clean the DVD or try another
	DVD. For cleaning
		There is no sound.	• The disc is dirty or flawed.
	information, see “Cleaning
			Clean the disc or try another
	discs” on page 44.
			disc. For cleaning
	• If the video signal passes
			information, see “Cleaning
	through a VCR to get to your
			discs” on page 44.
	TV or if your recorder is
			• Make sure that all cables are
	connected to a TV/VCR
			connected correctly and
	combination, the copy
			securely.
	protection on some DVDs
			• Make sure that none of the
	could affect picture quality.
			cables are damaged.
	Connect your recorder
			• Make sure that you have
	directly to the TV or connect
			selected the correct input
	your recorder using the
			source on the audio system.
	S-Video jack on the TV.
			• Make sure that your recorder
TV program picture does not	• Try a different channel.		is not in pause mode,
fill the screen.	• Re-scan for channels. For		fast-forward, fast-reverse,
	more information, see		slow-forward, or
	“Scanning for channels” on		slow-reverse mode.
	page 13.		• Make sure that the audio
			settings are correct. For more
TV program picture is	• If you are using an antenna,
			information, see “Setting the
distorted.	adjust the antenna.
			audio channel” on page 14.
	• Adjust the TV picture. For
	more information, see the TV	Sound has static.	• The disc is dirty or flawed.
	user guide.		Clean the disc or try another
	• Place your recorder and TV		disc. For cleaning
	farther apart.		information, see “Cleaning
	• Place the TV and any		discs” on page 44.
	“bunched” antenna cables
		No DTS sound is output.	• Your recorder is not
	farther apart.
			compatible with DTS sound.
	• Replace the video cables with
	a higher quality cable.	Remote control
Cannot change TV channels.	• If you are using an antenna,
	make sure that it is connected
	correctly and securely.	Problem	Solution
	• Check the remote control
	batteries and replace if	The remote control does not	• Make sure that there is not an
	necessary.
		work.	obstacle between the remote
Playback picture is distorted.	• Make sure that your recorder		control and the remote
	is not too close to devices		control sensor on the front of
	that may cause electrical		your recorder.
	interference, such as a cell		• Make sure that the remote
	phone.		control batteries are good.
			• Test the remote control to
Playback or TV program	• If the playback output from a
			make sure it is working. For
from connected equipment	DVD player, VCR, or tuner		more information, see
is distorted.	goes through your recorder		“Testing the remote control”
	before it reaches the TV, the		on page 44.
	copy protection on some		• Make sure the antenna or
	DVDs could affect picture		cable TV is connected
	quality. Re-connect the device		correctly and securely.
	directly to the TV.

www.insignia-products.com 45