Insignia NS-FSDVDR manual Using One-Touch recording, Setting up a timer recording

Insignia NS-FSDVDR DVD recorder

Using One-Touch recording

4

Press

or

to select a program number,

You can quickly set the amount of time you want

then press ENTER.

your recorder to record before it stops recording

and goes into standby mode.

Timer Programming

To use One-Touch recording:

Date

Start

End

CH

Speed

1.

--:--

--:--

L1

JAN/01

1 Press OPEN/CLOSE

to open the disc tray.

2.

---

2 Insert a formatted DVD with enough space

3.

---

for the recording into the tray, with the label

4.

---

facing up.

3 Press OPEN/CLOSE

to close the disc tray.

Your recorder reads the disc. This may take

a while.

4 Press REC SPEED to select a recording

speed.

5

Press

or

to enter the recording Date,

5 Press CH or CH or press the number

then press .

buttons to select the channel you want to

record.

Timer Programming

6 Press REC/OTR repeatedly to select the

amount of time you want to record. Each time

Date

Start

End

CH

Speed

you press the button, the recording time

1.

JAN/01

12

:57AM

--:--

L1

increases by 30 minutes up to 8 hours.

2.

---

Recording begins immediately. When the

3.

---

recording is complete, your recorder stops

4.

---

recording and goes into standby mode.

7To change the amount of recording time, press REC/OTR repeatedly until the time you want appears.

8To cancel the recording before the time runs

out, press STOP	.	6 Press or to enter the Start time, then
		press .

Notes

Press DISPLAY to view the remaining recording time.

You cannot pause a One-Touch recording.

Setting up a timer recording

You can schedule as many as eight recordings within a month. You can also schedule daily and weekly recordings.

To set up a time recording:

1Make sure that the clock is set. For more information, see “Automatically setting the clock” on page 14 or “Manually setting the clock” on page 14.

2Insert a formatted disc into the disc tray, then close the tray.

3Press TIMER PROG. The Timer Programming screen opens.

7Press or to enter the End time, then press .

Timer Programming

Date Start End CH Speed

1. JAN/01 12:57AM 1:57AM CH 8

2.---

3. ---

8Press or to select the channel number, then press . To record from an external device, select L1 (Line1) or L2 (Line2).

Timer Programming

Date Start End CH Speed

1. ---

2.---

3. ---

4.---

Timer Programming

Date Start End CH Speed

1.	JAN/01 12:57AM 1:57AM CH 8	1H
2.	---

9Press or to select a recording speed.

www.insignia-products.com 31