Insignia NS-FSDVDR manual Adjusting Dolby Digital audio, Using Dynamic Range Control

Insignia NS-FSDVDR DVD recorder

7 Press or to select an option, then press	6 Press or to select Dolby Digital, then
ENTER.		press ENTER. The Digital Out - Dolby Digital
• 48kHz—Select this option if your amplifier		screen opens.
or decoder is not compatible with 96 kHz
PCM. With this setting, 96 kHz sound is			Digital Out - Dolby Digital
output at 48 kHz.
• 96kHz—Select this option if your amplifier			PCM
or decoder is compatible with 96 kHZ			Stream
PCM.
8 Press SETUP to close the menu.

Adjusting Dolby Digital audio

If your recorder is connected to a Dolby Digital

sound system, you can adjust the audio.

To adjust the Dolby Digital audio:

1 If a DVD is playing, press STOP

.

7

Press

or

to select an option, then press

2 Press SETUP. The Setup menu opens.

ENTER.

3

Press

or

to select Playback, then press

• PCM—Select this option if your amplifier

ENTER. The Playback menu opens.

or decoder is not compatible with Dolby

4

Press

or

to select Audio, then press

Digital. Dolby Digital audio is converted

into PCM (2-channel) audio.

ENTER. The Audio menu opens.

• Stream—Select this option if your

amplifier or decoder is compatible with

Audio

Dolby Digital audio.

8 Press SETUP to close the menu.

Digital Out

Dynamic Range Control

ON

Note

When playing a DVD-RW recorded in VR mode:

If the audio source on a DVD is Dolby Digital

format, set Dolby Digital to PCM so that you can

switch to main (L), sub audio (R), or a mix of both

(L/R) with your amplifier or decoder.

Using Dynamic Range Control

The Dynamic Range Control feature

compresses the range between the loudest and

5

Press

or

to select Digital Out, then

softest sounds.

press ENTER. The Audio - Digital Out screen

opens.

To use Dynamic Range Control:

1 If a DVD is playing, press STOP

.

Audio - Digital Out

2

Press SETUP. The Setup menu opens.

3

Press

or

to select Playback, then press

PCM

48kHz

ENTER. The Playback menu opens.

Dolby Digital

Stream

4

Press

or

to select Audio, then press

ENTER. The Audio menu opens.

Audio

Digital Out

Dynamic Range Control

ON

www.insignia-products.com 25