Insignia NS-FSDVDR manual Recording from an external device, Protecting a DVD, Finalizing a DVD

Insignia NS-FSDVDR DVD recorder
			6	If the external device is connected to the
	E31-E32	DVD already contains 99 titles
		(maximum number)		jacks on the back of your recorder, press 001
				on the remote control or press
	E33	DVD already contains 999 chapters
				CHANNEL	or CHANNEL		on the front of
		(maximum number)
				your recorder to select L1.
	E34	No space on the DVD for control
				Or, if the external device is connected to the
		information
				jacks on the front of your recorder, press 002
	E35	PCA full
				on the remote control or press
	E36	DVD formatted in Video mode has		CHANNEL	or CHANNEL		on the front of
		already been finalized		your recorder to select L2.
			7	Press REC SPEED to select a recording
	E40	Some portion has not been recorded
		because of program overlapping.		speed.
		Recording did not start on time.	8	Press REC/OTR on the front of your
	E41	Power failed		recorder. Your recorder starts recording.
	E42	No DVD in the tray at the recording	9	Start playback on the external device.
		time	10	Press STOP		to stop the recording.

Recording from an external device

To record from an external device, you need to select the video source in the Setup menu, then record.

To select the video source in the Setup menu:

1Make sure that the external device, such as a VCR or camcorder, is connected to your recorder.

2Press SETUP. The Setup menu opens.

3Press or to select Required Setting, then press ENTER. The Required Setting menu opens.

4Press or to select Select Video, then press ENTER. The Select Video menu opens.

Select Video

L1	(Rear)	Video In
L2	(Front)	Video In

5Press or to select L1 (Rear) or

L2 (Front), then press ENTER. The Select Video L1 (Rear) or Select Video L2 (Front) screen opens.

6Press or to select Video In (if the device is connected to the A/V jacks) or S-Video In (if the device is connected to the S-Videojack), then press ENTER.

7Press SETUP to close the menu.

To record from an external device:

1Turn on the TV and your recorder.

2On the TV, select the video source that your recorder is connected to. For a list of common video sources by TV brand, see “TV video input sources” on page 12.

3Press OPEN/CLOSE to open the disc tray.

4Insert a formatted DVD with enough space for the recording into the tray with the label facing up.

5Press OPEN/CLOSE to close the disc tray. Your recorder reads the DVD. This may take a while.

Protecting a DVD

To avoid accidentally recording, editing, or erasing a DVD, you can protect the DVD.

Note

The DVD protection feature only works with DVDs formatted in VR mode.

To protect a DVD:

1Press SETUP. The Setup menu opens.

2Press or to select Disc, then press ENTER. The Disc menu opens.

3Press or to select

Disc Protect OFFON, then press ENTER. The Disc Protect OFFON screen opens.

Disc Protect OFF ON

Yes

No

4Press or to select Yes, then press ENTER. The DVD is protected.

Note

To remove DVD protection, select No in Step 4.

Finalizing a DVD

After you have recorded a DVD, you can finalize it so you can play it on another DVD player.

Notes

•Finalizing a DVD formatted in Video mode may take as long as 15 minutes. Finalizing a DVD formatted in VR mode may take as long as one hour.

•The more blank space on a DVD, the long it takes to finalize.

•Do not unplug the power cord or turn off your recorder while finalizing a DVD.

To finalize a DVD:

1Press SETUP. The Setup menu opens.

2Press or to select Disc, then press ENTER. The Disc menu opens.

www.insignia-products.com 33