Receiver operation
If
Muting the sound
| The unit is in normal mode (TV or radio mode). | |||||
| ∙ |
|
|
| ||
| Press the |
| key. | |||
|
| |||||
| The sound is muted, allowing you to make a phone call undisturbed, for example. | |||||
| In the OSD, Sound off is displayed for approximately 3 seconds. In the LED display | |||||
| the sound muting is shown by means of 3 dots. After changing programme, the | |||||
| message Sound off is displayed again. | |||||
| ∙ |
| ||||
Note | If you press the |
| key again the sound is turned back on. | |||
| ||||||
Mute is not operative at the VCR Scart socket. |
Stereo- / Mono- / Channel changeover
TV broadcasts can be transmitted in the
∙Press the key. Each time you press the key, you switch the sound channel in
the order,
Sound channel 1 → Sound channel 2 → Stereo.
The selected channel is shown on the screen and in the LED display. The setting is not saved. After a change in programme the original setting takes effect again.
SAT/TV changeover
Where the satellite receiver and TV set are connected via a Scart cable, many older TV sets immediately switchover signal input (on the Scart socket) to video re- ception when the satellite receiver is turned on. The switching voltage of the TV Scart socket therefore needs to be switched off if you want to view a terrestrially broadcast TV programme..
∙Press the key.
The switching voltage on pin 8 of the TV Scart socket is turned off, and it is turned on again by pressing once more.
In TV mode, “TV mode“ is displayed on the screen, the programme slot indicator in the LED display begins with “T...“.
In Sat mode, “Sat mode“ is displayed on the screen, the programme slot indicator in the LED display begins with “P...“.
Setting date and time
The unit is in normal mode (TV or radio mode)
∙Press the key to call up the menu for date and time setting, and turning the continuous time display on/off.
12