Kathrein UFD 420 manual Meaning of the columns, Making settings, Saving settings, Making changes

Receiver operation

Meaning of the columns

Date Switch-on date.

StartStart-time for automatic switch-on.

Stop Switch-off time.

No.Number of programme slot.

Making settings

After calling up the timer menu the cursor is positioned at the input line. The active menu entry is shown by means of a flashing cursor (>).

∙Use the numeric keys for the input ....

∙When using the numeric keys for input, the day/month and hour/minute entries

must always be entered in two-digit form, thus “02.01." or “08:05" (not “2.1." or “8:5"). If one of the columns of the input line already contains a value, the keys can also be used for adjustment.

∙Following correct data entry the cursor jumps to the next column.

∙Invalid entries or incorrect values are not accepted and are ignored.

∙Enter the desired programme slot in the “No.“ column.

∙To enter a radio programme slot press the key first of all.

Saving settings

∙Press the key in order to save your settings.

The values entered are placed in the topmost line of the display. The other entries are all shifted down by one line.

Making changes

If you want to alter a stored setting, place the cursor in the appropriate line by

pressing the key. Enter the new data in the usual manner and save the new entries with key .

To clear a timer that has been set, enter the programme slot as “00“ and save the entry.

Return to receive mode

∙Press the key in order to return to receive mode.

Note	If the timer is active, “rEC“ is shown on the VCR LED display.
	During the recording period, a switchover to tuner B by means of the	key is dis-
	abled. If you press this key the following message appears on the screen:

14