Timer Settings
You can use the timers for recording a programme with your video recorder on time. 14 timers are available which you can set to different channels as well as start and end times.
To access the timer setting, press to enter the main channel menu, to go to system parameters, followed by and to local time/ timer and . You now see the display:
Press the buttons to move the cursor to the timer you
require and confirm it by pressing . Press to exit the timer again.
Incorrect time settings will be rejected. You can select and set
•the type of channels (TV, radio or software download)
•the channel location with channel name
•the start time (day, months, year, hour, minute)
•the stop time
•the timer status – inactive/once/daily/weekly
for 14 timers. You must enter leading zeros for the time settings. Use the and the number buttons to make the required setting.
The current time that you must
Finally confirm the settings by pressing or 3x.
If you have preprogrammed a download using a timer, all subsequent timer settings will be ignored after successful download!
VPS signal
No VPS signal is transmitted for digital television.
You will therefore need to programme your video recorder
corresponding | to | the | timer | settings. |
25