Safety Information
Important information on operation
In the following section you will find important information on operation, place of installation and connection of the receiver.
Please read this information carefully before you start up your receiver.
Longer periods of absence/thunderstorm
Always switch off the receiver with the power switch at the front left in the event of longer periods of absence and during a thunderstorm. This also applies to any other devices that may be connected to the receiver.
If timer programming is set, make sure the receiver is switched on in good time before the set recording time.
Mains lead
Take particular care to ensure that the mains lead (power supply cable) is not damaged. Never operate the device with a defective mains lead.
Cleaning
Disconnect the mains power plug before you clean the receiver. Use a soft dry cloth for this purpose. Only clean the surface of the casing.
Never open the casing. Contact with parts on the inside of the receiver poses a risk of electric shock.
Playing children
Make sure that children do not insert objects into the ventilation slots.
This is a source of danger and fatal injury by electric shock.
Repair
Only have qualified service personnel carry out repairs or adjustments to your receiver. Unauthorized opening up of the receiver and attempts at repair will invalidate the guarantee.
Unauthorized tampering with the device can jeopardize the electrical safety of the receiver.
The manufacturer shall not be liable for accidents to the user as the result of the receiver being opened up.
Connections
Incorrect connection can lead to problems in operation or cause defects in the device.
6