Kathrein UFD 570/S manual Switching over to radio channel, Reception status radio

Channel Selection

Switching over to radio channel

You can switch over from a TV channel to a radio channel.

Press the button on the remote control for this purpose.

The receiver switches over to the channel location of the radio channels last set. You can return to the TV channel by pressing the

same button or . The corresponding display relating to the received channel, i.e. as when selecting the TV channels, appears on the screen. The LCD display shows a small "r" together with the channel location number.

The screen will be blanked out after several seconds.

Reception status - radio

After switching over the receiver, simply press the buttons to select other radio channels in their ascending or descending order in the channel memory.

Every time you press the button, an on-screen display shows you the selected channel together with the time, the programme start and end times as well as the channel title in the information banner provided this data is transmitted together with the signal.

By pressing the button, you can leave this information bar permanently displayed or switch it off by pressing the button once again.

A further option of selecting a different channel is to press the button. The radio channel list is now displayed. In the top right

23