Sound Settings
AC3
The receiver can process sound transmissions in AC3 format (Dolby Digital) providing you with the opportunity of listening to cinema sound quality in your living room. The digital sound output is provided for this purpose. You will need to connect it to a corresponding system.
Please refer to the instructions manual of your Dolby Digital system.
In order to reproduce the AC3 format, set your receiver in the audio menu under "stereo" to “1 of 2" or "2 of 2 (2 Ch)". The corresponding transmission – "5.1 Ch" (5 channels + 1 subwoofer channel) is then indicated at “Dig. output”.
Not many broadcasters transmit the AC3 format. If AC3 format is not transmitted, you will only be able to select the standard stereo or mono settings or select the broadcast language.
Mute
Press the button on the remote control to mute the sound. This symbol appears on the screen.
Press the button again to restore the sound. The standard volume display bar is then shown for several seconds.
Although you can change the channel while in mute mode, it will remain muted until this mode is cancelled or you correct the volume.
27