Kathrein UFD 570/S manual Channel Overview

Channel Overview

Here you can enter the details of the new channel. The first line in the list is highlighted by a coloured bar.

Press the buttons to move the bar vertically to the required position.

Press the  buttons or the number buttons to edit the relevant position, i.e. to make the necessary entries.

It is possible to set

•the received network,

•the channel,

•the channel name.

Only alphanumeric and decimal entries are accepted at the positions

•Video PID (program identification)

•Audio PID and

•PCR PID (PCR = program clock reference)

Access the channel list again by pressing . Confirmation is given that your changes have been saved and the information display of the channel currently received appears for several seconds on the screen. The new channel is added to the end of the existing channel list.

You can obtain the necessary PIDs from relevant TV and satellite magazines and the Internet. Refer to section "Notes on operation" for information on how to make alphanumeric entries.

Never change the PIDs without good reason as they affect the identification of the reception signal.

This function is only required for channels that are not broadcast in accordance with the DVB-T standard. All standard channels are detected and stored by the automatic scan.

36