Kathrein UFD 570/S manual Installation menu, Mode, Network configuration

Setting System Parameters

A/V mode

Using the buttons, here you can select the type of video signal applied at the SCART socket. Select the signal that your TV set can process.

Refer to the operating manual of your TV set!

•Composite colour signal – basic band signal (FBAS)

•RGB – Red/Green/Blue signal or

•Y/C – S-VHS signal (luminance/chrominance)

Confirm your selection by pressing twice.

Installation menu

You should not change the following settings without good reason as they represent factory settings or operational settings that are adapted to your receiving system.

New settings are only required when changes or expansions are made to the reception system.

The main menu consists of the following submenus:

Select the "Installation" menu with the menu button , the

buttons in the main menu and . If set, you must also enter the password. Select the menu items with the

buttons.

Network configuration

You can remove and add networks in this menu. Please refer to the TV program magazines and periodicals as well as to the Internet for

information on new programmes in new networks. Press to open the menu.

53