Satellites
Setting and activation
Path: MENU>Main menu>Satellites 1...8>Orbit position
1.Select Orbit position 1…4
2.Select Uncom switch
The “Uncommitted switches” function is activated in menu item 2 = “Uncom switch”, by switching from “OFF” to a value between 1 and 16.
Transmission takes place with the “FX” byte.
The following matrix shows the associated DiSEqC
sequences: |
|
US = OFF DiSEqC™: = [E0 | 10 38 FY] |
US = 1...16 DiSEqC™: = [E0 | 10 39 FX]<25 ms> |
[E0 10 38 FY] |
|
In the DiSEqC menu (path: MENU>Main menu> Installation>DiSEqC™) if the option DiSEqC™ Repeat is set to 1, then the DiSEqC™ sequence repeats after 100 ms.
US = OFF DiSEqC: = [E0 | 10 38 |
FY]<100 ms>[E1 10 38 FY] |
|
US = 1...16 DiSEqC: = [E0 | 10 39 FX]<25 ms>[E0 10 38 FY] |
<100 ms>[E1 10 38 FY] |
|
Enable
ON The selected satellite is enabled for your reception system (only the ASTRA satellite is enabled at the factory)
OFF The selected satellite is disabled.
40