Kathrein UFS 702si, UFS 702sw manual Picture format, Digital audio, AC-3, VCR signals

Picture format

4:3

If 4:3 is set, all programmes are displayed in the

regular 4:3 format.

16:9 When 16:9 is set, all programmes broadcast in

widescreen format, and flagged appropriately, are

automatically switched to 16:9 format.

However, this function only operates if your TV set

can process and display 16:9 format pictures (6 volt

switching voltage).

Digital audio

Two modes are available for the digital output of your

receiver:

Standard The signal at the digital output is encoded in

PCM format (“PCM”)

AC 3

If you have a Dolby Digital system, you can

select AC3/Dolby Digital mode.

If your receiver receives a Dolby Digital

encoded audio signal, the digital output is

automatically switched to Dolby Digital format

(AC-3).

Note:

In both modes, press button A at any time to display the

“Digital/analogue audio mode” menu to check the current

format of the digital output signal or make a different

selection, if necessary.