Kathrein UFS 702sw Manual Timer Setting, Automatic Timer Setting, Deleting a Timer Event

Timer

	Press the  button (red dot) to access the “Timer
	Programming” menu. Up to 8 timer events, for TV or radio
	programmes, can be entered.
Note:	Please note that if you select “VCR-Record = Standard” the
	video recorder must also be set to identical recording times.

Manual Timer Setting

If the timer recording is started in stand-by mode, the unit switches back to stand-by when recording is finished.

Automatic Timer Setting

If timer recording is star- ted in stand-by mode, the unit switches back to stand-by when recording is finished.

With the number pad or the  keys, select the next free input field (in the figure to the left, it is timer number two). One after another, select the input field for date, start and stop time

and the programme to be recorded with the  keys (the

input field is highlighted in white). With the  key you activate the input in the selected field (the field is highlighted in black). Enter the relevant data either directly with the number pad or

by switching forward with the  keys and accepting the

inputs with . After entering the date, start and stop time and the programme to be recorded, you can exit the timer menu

with the  key or enter additional timer events.

You can also import the timer data directly from the programme listings. To do so, select the programme from

the listing and then press the  button (red dot) to transfer its data into the timer. Confirm the data import into the timer

by pressing  again.

Deleting a Timer Event

To delete a timer event, select the relevant line in the timer using the number pad or the  keys and then pressing the  key.

36