Strong Enterprises SRT 6850 manual Part 1 English

Page 28

PART 1 • English

„Adjust Time: Use your Numeric buttons [0-9]to set the local time. Once set, press OK to save the time.

„Select Set Date: Press OK or the Right button and set the date the way you have set the time.

Note: We advise you to use the GMT time settings, if you use the manual time settings, the time will be lost after the unit has been disconnected from the mainpower.

2.Press the BACK button until you go back to the Main Menu.

„Power on Channel: This function allows you to set the channel you want when the receiver turns on. To set the power on channel, apply the following steps:

1.Select Power on Channel and press OK or the Right button.

„Last Channel: The receiver will start-up with the channel that you viewed before turning the receiver off.

„Defined Channel: This function allows you to set the channel you want when the receiver turns on. To define the channel, apply the following steps:

1.Press OK or the Right button and select in the TV or radio list of channels the channel you want to have your receiver start-up with.

„Software Upgrade: You can download the latest software available including new technologies to your receiver. To upgrade your system, apply the following steps:

1.Select “Software Upgrade” and press OK. Enter your PIN code.

2.Press the Green button to scan the satellite for availability of a newer software version. If there is a recent software version available for your receiver, it will be detected.

3.Press the Red button to start the upgrade.

4.Press the BACK button until you go back to main menu.

Note: Be sure that your receiver is connected to the satellite signal. Do not turn off your receiver while you are downloading new software.

27

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Page Page Table of Contents Usage Part 1 EnglishDo not Install Your Receiver Features & Accessories AccessoriesSafety Precautions Storage Equipment Set-upSAT Your ReceiverSAT OUT IR Sensor Connections Connecting to your TV & VCR TV, this will ensure a better Picture and Sound qualityAt the back of your receiver Connection with Audio Cable RCA ConnectorsPlease see inside cover Figure Connecting a remote eye Please see inside cover Figure Connecting a serial cable Please see inside cover FigureConnecting a dish on a motorized positioner to your receiver Quick start Part 1 English Picture below Navigating in the menu Main MenuChannel Organizer Menu See also page 31, 5.1.4.3 Channel Set-up, Scan ModeImportant Note Channel lists Setting Favourite channels from the channel list Part 1 English Sorting Channels from the channels listChange name of channel Editing Channels from the channel listChange lock function Part 1 English Change the Skip function Deleting Channels from channel listFavourite Organizer Menu Timer Menu Installation Menu System Set-up MenuPart 1 English Press Back until you go back to main menu Part 1 English Part 1 English LNB Set-up Channel Set-up Press the Yellow Save button to save the settings Please also refer to page 18, 5.1.1 Channel Organiser Menu Before you start Parental Lock Changing PIN Code Your Personal PIN Code Smartcard Remote Control Basic functions Standby ON/OFFSUB TextTV/RAD Pause AudioTrouble Shooting Symptoms CausePart 1 English Symptoms Cause Solution No sound or pictureGlossary of terms Code Subscriber CardTechnical Specifications System & Memory General Data
Top Page Image Contents