Strong Enterprises SRT 6850 manual Please also refer to page 18, 5.1.1 Channel Organiser Menu

Page 33

PART 1 • English

„Scan Mode: “Canal Digitaal” (Only appears if in the field “Satellite” the “ASTRA” satellite is chosen). Once you search channels in “Canal Digitaal” scan mode the receiver will do a quick scan and will find all channels that have been listed by Canal Digitaal. The found channels will be stored in your receiver in a logical order.

“Free only” (Free to Air) only or “All Channels” to find all available channels on the satellite.

Scan channels from the satellite: Your receiver allows you to use 4 types of channel scans:

„AutoScan (Red Button): Starts the automatic channel scan by using the parameters that you have set in the “Channel Set-up menu”.

Please also refer to page 18, “5.1.1 Channel Organiser Menu”.

„Net. Scan (Green Button): “Network Search” Performs network search for a transponder.

„Transponder Scan (Yellow Button): Search channels from current specific transponder.

„PID (Blue Button): You can search a specific channel by entering the PID value of a channel. If you press the Blue (PID) button, the PID screen is displayed. Enter the PID value and press the Blue button again. To cancel the PID value, press BACK on the remote control or press the Blue (PID) button to search the channel. You should enter V-PID, A-PID and P-PID as described in “Editing channels from the channel list” (Described in section 5.1.1)

Tip: Check the level and quality of the signal bar before searching any channels. The signal level of the TP of the current satellite is displayed. The green bar is dis- played if the settings are correct, otherwise the red bar is displayed and you can- not get the channel. In the latter case, check if your dish is aimed at the selected satellite or if the DiSEqC switch of the LNB overlaps with another satellite. Also, change the Frequency with the Left/Right button until the Green bar is displayed to get the valid transponder. If you press the Red (Auto Scan), Green (Net. Scan), Yellow (TP Scan), or Blue (PID) button the channel searching status is displayed.

32

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Page Page Table of Contents Part 1 English UsageDo not Install Your Receiver Accessories Features & AccessoriesSafety Precautions Equipment Set-up StorageYour Receiver SATSAT OUT IR Sensor TV, this will ensure a better Picture and Sound quality Connections Connecting to your TV & VCRConnection with Audio Cable RCA Connectors At the back of your receiverPlease see inside cover Figure Connecting a serial cable Please see inside cover Figure Connecting a remote eye Please see inside cover FigureConnecting a dish on a motorized positioner to your receiver Quick start Part 1 English Picture below Main Menu Navigating in the menuSee also page 31, 5.1.4.3 Channel Set-up, Scan Mode Channel Organizer MenuImportant Note Channel lists Part 1 English Sorting Channels from the channels list Setting Favourite channels from the channel listEditing Channels from the channel list Change name of channelChange lock function Deleting Channels from channel list Part 1 English Change the Skip functionFavourite Organizer Menu Timer Menu System Set-up Menu Installation MenuPart 1 English Press Back until you go back to main menu Part 1 English Part 1 English LNB Set-up Channel Set-up Press the Yellow Save button to save the settings Please also refer to page 18, 5.1.1 Channel Organiser Menu Before you start Parental Lock Changing PIN Code Your Personal PIN Code Smartcard Standby ON/OFF Remote Control Basic functionsSUB TextTV/RAD Audio PauseSymptoms Cause Trouble ShootingNo sound or picture Part 1 English Symptoms Cause SolutionGlossary of terms Subscriber Card CodeTechnical Specifications General Data System & Memory
Top Page Image Contents