Strong Enterprises SRT 6850 manual Press the Yellow Save button to save the settings

Page 32

PART 1 • English

„LNB: Select “LNB” and press OK or the Right button. In the “LNB field”, select one of the available LNB's. If you want to set LNB related values, press OK and the LNB Set-up menu (Described in LNB Set-up) will be displayed.

„Dish Position: Select “Dish position” and press OK or the Right button. It displays the dish position of the current satellite. When you use a DiSEqC 1.2 positioner, you can select dish position in this field. To set a dish position, the status must be “On” (in case the position has already been set) or “Off” (in case the position has not been set).

Note: If in the “LNB Set-up” menu described in section 5.1.4.2, the “LNB Dish” item is set to “fixed” you will not be able to change the dish position settings in the channel set up menu. Only when you have selected the “LNB Dish” to “moved”, you will be able to change the settings in the channel set up menu.

„Press OK button to set dish position. The “Positioner Set-up” menu will be displayed. (Detailed description is in Positioner Set-up section 5.1.4.3.1)

„Frequency, Polarization, Symbol Rate: Shows the transponder (TP) values of the current satellite. To change the value apply the following steps:

1.Select ”Frequency” and press OK. The list of TP values of the current satellite is displayed.

2.The functions of the colored buttons now represent other functions. <Screen 6>.

3.To edit a TP value, press the Red (Edit) button

4.To Add a TP manually, press the Green (Add) button

5.Press the Blue (Delete) button to delete the current TP value. (Save is only available in the Edit mode or the Add mode.)

6.Press the Yellow (Save) button to save the settings.

31

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Page Page Table of Contents Usage Part 1 EnglishDo not Install Your Receiver Features & Accessories AccessoriesSafety Precautions Storage Equipment Set-upSAT OUT Your ReceiverSAT IR Sensor Connections Connecting to your TV & VCR TV, this will ensure a better Picture and Sound qualityPlease see inside cover Figure Connection with Audio Cable RCA ConnectorsAt the back of your receiver Connecting a remote eye Please see inside cover Figure Connecting a serial cable Please see inside cover FigureConnecting a dish on a motorized positioner to your receiver Quick start Part 1 English Picture below Navigating in the menu Main MenuImportant Note Channel lists See also page 31, 5.1.4.3 Channel Set-up, Scan ModeChannel Organizer Menu Setting Favourite channels from the channel list Part 1 English Sorting Channels from the channels listChange lock function Editing Channels from the channel listChange name of channel Part 1 English Change the Skip function Deleting Channels from channel listFavourite Organizer Menu Timer Menu Installation Menu System Set-up MenuPart 1 English Press Back until you go back to main menu Part 1 English Part 1 English LNB Set-up Channel Set-up Press the Yellow Save button to save the settings Please also refer to page 18, 5.1.1 Channel Organiser Menu Before you start Parental Lock Changing PIN Code Your Personal PIN Code Smartcard Remote Control Basic functions Standby ON/OFFSUB TextTV/RAD Pause AudioTrouble Shooting Symptoms CausePart 1 English Symptoms Cause Solution No sound or pictureGlossary of terms Code Subscriber CardTechnical Specifications System & Memory General Data
Top Page Image Contents