Strong Enterprises SRT 6850 manual Channel Set-up

Page 31

PART 1 English

Tip: If you set “LNB type” to “Universal” (UNI1 ~ UNI3), you will not be able to change settings in both the “LNB Power” menu item and the “Switch 22 kHz” menu item. If you want to change any of these two settings you must set “LNB type” to zero. If DiSEqC switch is Off, you will not be able to change settings in both the “DiSEqC Input” and “DiSEqC Repeat” menu items. Alternatively if you set LNB Dish to “Moved”, the DiSEqC switch menu item is automatically switched to off if your “LNB dish” is set to “Fixed” you will be able to select the required DiSEqC level in the DiSEqC switch menu item.

6.Press the Red (Save) button, the Green (Save & Exit) button to save the setting.

7.Press the Yellow (Back) button or BACK button if you don't want to save the setting.

5.1.4.3Channel Set-up

The channel set-up is for downloading the channels available on the satellites. You can select the satellite according to your dish alignment, change the frequency, scan mode, you can edit the satellites name, and edit the transponder of the satellite. You can also display the LNB menu and the Positioner Set-up menu by selecting LNB and Dish Position respectively.

1.Press the Menu button.

2.Using UP/DOWN keys on your remote, select "Installation" and press OK.

3.Using UP/DOWN keys, select "Channel Set-up" and press OK.

4.Use the UP/DOWN keys on your remote to select an item and use the Left/Right button to set up any values.

„Satellite: Select “Satellite” and press OK or the Right button. The satellite list is displayed and then you can choose a satellite from which you want to download your channels from by pressing OK.

30

Image 31
Contents Page Page Table of Contents Part 1 English UsageDo not Install Your Receiver Accessories Features & AccessoriesSafety Precautions Equipment Set-up StorageSAT Your ReceiverSAT OUT IR Sensor TV, this will ensure a better Picture and Sound quality Connections Connecting to your TV & VCRAt the back of your receiver Connection with Audio Cable RCA ConnectorsPlease see inside cover Figure Connecting a serial cable Please see inside cover Figure Connecting a remote eye Please see inside cover FigureConnecting a dish on a motorized positioner to your receiver Quick start Part 1 English Picture below Main Menu Navigating in the menuChannel Organizer Menu See also page 31, 5.1.4.3 Channel Set-up, Scan ModeImportant Note Channel lists Part 1 English Sorting Channels from the channels list Setting Favourite channels from the channel listChange name of channel Editing Channels from the channel listChange lock function Deleting Channels from channel list Part 1 English Change the Skip functionFavourite Organizer Menu Timer Menu System Set-up Menu Installation MenuPart 1 English Press Back until you go back to main menu Part 1 English Part 1 English LNB Set-up Channel Set-up Press the Yellow Save button to save the settings Please also refer to page 18, 5.1.1 Channel Organiser Menu Before you start Parental Lock Changing PIN Code Your Personal PIN Code Smartcard Text Remote Control Basic functionsStandby ON/OFF SUBTV/RAD Audio PauseSymptoms Cause Trouble ShootingNo sound or picture Part 1 English Symptoms Cause SolutionGlossary of terms Subscriber Card CodeTechnical Specifications General Data System & Memory