Strong Enterprises SRT 6850 manual Parental Lock Changing PIN Code

Page 35

PART 1 • English

11.If for instance you want to set the position for Astra 19.2°East, you know that you will have to move your dish to the left using the Left button. If you want to set the position for instance to Eutelsat 12.5°West, you know that you will have

to move your dish to the right using the Right button. (As viewed from the rear of the dish)

To set the position of your selected satellite:

1.Use your UP/DOWN buttons to go to the “Movement field”.

2.Use your Left/Right buttons to have your dish turn towards the right direction, and keep this direction button pushed in continuously. Once the receiver has found the right position for the selected satellite, the word “Locked” will appear above the signal level and quality indicator. To be sure you have the strongest signal possible, press the direction you moved your dish in once again, and look if the signal/quality improves. If this is not the case, move the dish back one position, by pressing the other direction once.

3.If you are sure that you have the strongest signal/quality for the selected satellite:

„Use your UP/DOWN buttons to go to the “Save” field.

„Use your Left/Right buttons to set to “On” and press OK. The position

for the selected satellite is now saved and your dish will move to this position, every time a channel from this satellite is chosen.

Repeat this procedure for every satellite position and once you have complete the settings: Use Red (Auto Scan), Green (Net. Scan), Yellow (TP Scan) or Blue (PID) to search channels.

5.1.4.4 Parental Lock - Changing PIN Code

This function changes the Personal Identification Number (PIN) that is used to control access to the menu and individual channels. In this function, you can lock/unlock channels and you can change your PIN code by applying the following steps:

To lock/unlock the menu, please apply the following steps:

34

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Page Page Table of Contents Part 1 English UsageDo not Install Your Receiver Accessories Features & AccessoriesSafety Precautions Equipment Set-up StorageSAT OUT Your ReceiverSAT IR Sensor TV, this will ensure a better Picture and Sound quality Connections Connecting to your TV & VCRPlease see inside cover Figure Connection with Audio Cable RCA ConnectorsAt the back of your receiver Connecting a serial cable Please see inside cover Figure Connecting a remote eye Please see inside cover FigureConnecting a dish on a motorized positioner to your receiver Quick start Part 1 English Picture below Main Menu Navigating in the menuImportant Note Channel lists See also page 31, 5.1.4.3 Channel Set-up, Scan ModeChannel Organizer Menu Part 1 English Sorting Channels from the channels list Setting Favourite channels from the channel listChange lock function Editing Channels from the channel listChange name of channel Deleting Channels from channel list Part 1 English Change the Skip functionFavourite Organizer Menu Timer Menu System Set-up Menu Installation MenuPart 1 English Press Back until you go back to main menu Part 1 English Part 1 English LNB Set-up Channel Set-up Press the Yellow Save button to save the settings Please also refer to page 18, 5.1.1 Channel Organiser Menu Before you start Parental Lock Changing PIN Code Your Personal PIN Code Smartcard Text Remote Control Basic functionsStandby ON/OFF SUBTV/RAD Audio PauseSymptoms Cause Trouble ShootingNo sound or picture Part 1 English Symptoms Cause SolutionGlossary of terms Subscriber Card CodeTechnical Specifications General Data System & Memory
Top Page Image Contents