Strong Enterprises SRT 6850 manual Part 1 English Symptoms Cause Solution, No sound or picture

Page 42

PART 1 English

 

 

Symptoms

Cause

Solution

No sound or picture

Problem in scart cable

Firmly press the scart connectors on the

 

connections between

backside of the TV and receiver. Replace

 

receiver and TV

the scart cable

No picture

Wrong alignment of

Check the signal strength with a spectrum

 

the dish

analyser and adjust your dish correctly.

The receiver displays

This is normal, the

the message “No or

bad weather is

Bad signal” during

interfering the signal

bad weather conditions

between the satellite

(heavy rain or snow)

and your dish

Once the weather is better the picture will appear. If not : check if there is no snow on your dish

The receiver displays

Wrong satellite selected

Press the SAT button on the RCU and

the message “No or

in the menu

select the correct satellite

Bad signal”

 

 

The receiver displays

Wrong parameters set Check settings in LNB- and Channel set up

the message “No or

in the menu

menu

Bad signal”

 

 

The receiver displays

Wrong alignment of

Ask your dealer to check the outdoor unit

the message “No or

the dish

and antenna cable to LNB

Bad signal”

 

 

The remote control is

The batteries of the

Check whether the batteries are inserted

not working

remote control are

correctly in your remote control. Check the

 

not inserted or

batteries, and if they are exhausted,

 

exhausted

replace them

41

Image 42
Contents Page Page Table of Contents Usage Part 1 EnglishDo not Install Your Receiver Features & Accessories AccessoriesSafety Precautions Storage Equipment Set-upYour Receiver SATSAT OUT IR Sensor Connections Connecting to your TV & VCR TV, this will ensure a better Picture and Sound qualityConnection with Audio Cable RCA Connectors At the back of your receiverPlease see inside cover Figure Connecting a remote eye Please see inside cover Figure Connecting a serial cable Please see inside cover FigureConnecting a dish on a motorized positioner to your receiver Quick start Part 1 English Picture below Navigating in the menu Main MenuSee also page 31, 5.1.4.3 Channel Set-up, Scan Mode Channel Organizer MenuImportant Note Channel lists Setting Favourite channels from the channel list Part 1 English Sorting Channels from the channels listEditing Channels from the channel list Change name of channelChange lock function Part 1 English Change the Skip function Deleting Channels from channel listFavourite Organizer Menu Timer Menu Installation Menu System Set-up MenuPart 1 English Press Back until you go back to main menu Part 1 English Part 1 English LNB Set-up Channel Set-up Press the Yellow Save button to save the settings Please also refer to page 18, 5.1.1 Channel Organiser Menu Before you start Parental Lock Changing PIN Code Your Personal PIN Code Smartcard SUB Remote Control Basic functionsStandby ON/OFF TextTV/RAD Pause AudioTrouble Shooting Symptoms CausePart 1 English Symptoms Cause Solution No sound or pictureGlossary of terms Code Subscriber CardTechnical Specifications System & Memory General Data