Strong Enterprises SRT 6850 manual Connecting a dish on a motorized positioner to your receiver

Page 14

PART 1 • English

3.2 Connecting to a satellite dish

3.2.1 Connecting a fixed satellite dish to your receiver

(Please see inside cover Figure 11)

„Select the satellite from which you want to receive your TV/Radio channels.

„Align your dish at the requested satellite.

„Connect a coaxial cable to your LNB.

„Connect the other end directly to the SAT IN connector of your receiver.

3.2.2Connecting multiple fixed dishes to your receiver using a DiSEqC1.0 switch (Please see inside cover Figure 12)

If you want to watch programs from more than one satellite (For instance from Astra and from Hot Bird) it is advisable to use fixed dishes and a DiSEqC 1.0 switch.

„Have your Strong Dealer aim the dishes at the requested satellites.

„Connect the LNB's with coaxial cables to the IN connectors of the DiSEqC 1.0 switch.

„Connect the OUT connector of the DiSEqc 1.0 switch to the SAT IN connector at the back of your receiver.

3.2.3Connecting a dish on a motorized positioner to your receiver

(Please see inside cover Figure 13)

Another possibility of watching programs from multiple satellites is by mounting a dish to a motorized DiSEqc 1.2 positioner.

„Have your Strong dealer mount the dish to the positioner with the correct azimuth angle of elevation and let him set the centre point for your positioner.

„Connect the LNB with a coaxial cable to the LNB IN connector of the positioner.

„Connect the OUT connector of the positioner to the SAT IN connector at the back of your receiver.

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Page Table of Contents Usage Part 1 EnglishDo not Install Your Receiver Features & Accessories AccessoriesSafety Precautions Storage Equipment Set-upSAT OUT Your ReceiverSAT IR Sensor Connections Connecting to your TV & VCR TV, this will ensure a better Picture and Sound qualityPlease see inside cover Figure Connection with Audio Cable RCA ConnectorsAt the back of your receiver Connecting a remote eye Please see inside cover Figure Connecting a serial cable Please see inside cover FigureConnecting a dish on a motorized positioner to your receiver Quick start Part 1 English Picture below Navigating in the menu Main MenuImportant Note Channel lists See also page 31, 5.1.4.3 Channel Set-up, Scan ModeChannel Organizer Menu Setting Favourite channels from the channel list Part 1 English Sorting Channels from the channels listChange lock function Editing Channels from the channel listChange name of channel Part 1 English Change the Skip function Deleting Channels from channel listFavourite Organizer Menu Timer Menu Installation Menu System Set-up MenuPart 1 English Press Back until you go back to main menu Part 1 English Part 1 English LNB Set-up Channel Set-up Press the Yellow Save button to save the settings Please also refer to page 18, 5.1.1 Channel Organiser Menu Before you start Parental Lock Changing PIN Code Your Personal PIN Code Smartcard SUB Remote Control Basic functionsStandby ON/OFF TextTV/RAD Pause AudioTrouble Shooting Symptoms CausePart 1 English Symptoms Cause Solution No sound or pictureGlossary of terms Code Subscriber CardTechnical Specifications System & Memory General Data
Top Page Image Contents