TOA Electronics C-RM1000 CU Equipment Selection, Digital Video Recorder Selection

Page 13

7. EQUIPMENT SELECTION

7.1. Digital Video Recorder Selection

1. Press the desired Digital Video Recorder number using a [Example] ten-key numerical pad.

7

2.Press the DVR key.

The selected Digital Video Recorder number is displayed on the LCD screen. (The key cannot be used if the Digital Video Recorder is not connected.) For monitors and cameras, Monitor 1 and Camera 1 are automatically selected.

7.1.1.Group Selection (cascade connection only)

Notes

DVR	LCD screen

7 1 1

DVR MENU

DVR

MON

CAM

POS

•Group settings must be performed in advance. (Refer to p. 40; Group Settings.)

•Screens are not switched during group selection even when an alarm signal is received or the priority recording button is pressed.

1.	Press the Shift key.	MENU	[Example]
		MENU	MENU
2.	Press the desired Digital Video Recorder group number.		2

3.Press the DVR key.

The indication "G_Group No." is displayed in the DVR section of the LCD screen.

SHIFTSHIFT

DVR LCD screen

G 2	1	1
DVR MENU
DVR	MON	CAM	POS

7.2. Monitor Selection

Functions that can be displayed differ depending on the monitor output. (Refer to p. 15; Monitor display.)

Press the MON key.

The monitor output alternates between 1 and 2 each time the MON key is pressed, and the monitor number is displayed on the LCD screen.

MON	MON
LCD screen	LCD screen

7	1	1		7	2	1
DVR	MON	CAM	POS	DVR	MON	CAM	POS

Note:

Be sure to set Monitor Lock if multiple Remote Controllers are connected in the system. (Refer to p.50; Monitor Lock.)

13

Image 13

Contents Operating Instructions Remote ControllerSettings Table of ContentsGeneral Description Digital Video Recorder Operation OperationConnections When YOU Need HelpSafety Symbol and Message Conventions Safety PrecautionsWhen Installing the Unit When the Unit is in UseModifications Functions Equipment that can be controlled by the Remote Controller Handling PrecautionsConnectable Equipment and Their Maximum Numbers DR091 and C-DR161 Series Digital Video RecordersMulti-segment split screen display Definition Digital Video Recorder number DVRNomenclature and Functions Playback mode Joystick Live modeMenu display mode Focus Key Focus Live modeRear Panel AC Adapter Power Input Terminal DC in 13.8Bottom Surface Indications DVR Control Output Terminal B screwless typeDigital Video Recorder Selection Equipment SelectionMonitor Selection Group Selection cascade connection onlyCamera Selection Press the Full key Designated cameras image is displayed on Full Screen DisplayFull screen and the Full key lights. The camera Number is displayed on the LCD screenSegment Split-Screen Display Multi-Screen DisplaySegment Split Screen Display Sequential Display Changing the Multi-Screen Display PositionGroup Sequential Display Zoom Display Electronic zoom Focus Adjustment Camera Rotation and Zoom Operation Using the JoystickCombination Camera Operation Auto-Function Operation Iris Operation Communication method Type B onlyCamera Position Selection Utilization of the Abbreviation Number Function Focus Speed SettingsCombination Camera Menu Display Example Storing the Preset PositionsVideo Recording Digital Video Recorder OperationLED indication during recording Priority recording operationPlayback mode settings Resetting alarm event recordingPlayback Operation Making normal recordingForward/reverse quick playback Stop operationTime skip forward/reverse playback Pause operationFrame advance/reverse playback Instant event access playbackEarliest image playback Latest image revers playbackDigital Video Recorder Menu Display Search OperationArchiving Motion Detection Area SettingsTriplex Settings Log-in Entering the Digital Video Recorder PasswordLog-out Log-In and Log-Out Other OperationsWhen alarm is triggered Alarm OperationsAbbreviation Number Putting screen switching on hold when an alarm occurs To reset alarmTo stop a buzzer tone Password Setting Item SummariesYES TOA-A TOA-B Bosch PELCO-D Remote controller menu listKeys to be used for settings Setting Keys and Display ScreenLCD screen display Displaying the menu Basic Setting OperationsOperation during menu display Closing the menuGroup settings Function SettingsSetting contents When selecting Setting …When selecting Erase… When selecting Transfer…Abbreviation Setting contents Abbreviation Quick display function Abbreviation Function programming When the cameras protocol is TOA-A Type aDefault abbreviation number settings When the cameras protocol is TOA-B Type BTOA-A Camera ProtocolOperation Level Pattern Passwords and operation levelsFocus speed Password SettingsBuzzer tone 12.4.10. I/O Speed Key operation toneDVR check N I T O R L O C K Language Joystick position adjustmentInitial status ExpansionCombination camera Equipment ConnectionsDigital video recorder Interface unitBasic system System ExampleInterface Unit C-RF1000 Expanded Digital video recorder system Cascade-connectionRemote Controller connections using the dedicated cable Digital Video Recorder Failure Indication Remote Controller Indication and StatusStopping the buzzer tone Troubleshooting Equipment selection Operation GuideOther operations Accessories SpecificationsOptional products