TOA Electronics C-RM1000 CU operating instructions Camera Protocol, Toa-A

12.4.5. Camera Protocol

Selecting protocol of the Combination Camera connected to the Digital Video Recorder only displays the abbreviation function that can be used for each protocol. The abbreviation function table is factory-preset to those for the model of TOA-A.

Note

Multiple combination cameras using different communication methods cannot be connected to a single digital video recorder. Match the communication methods of all connected cameras.

TOA-A	: Select this model when connecting TOA’s Combination Camera to the Digital Video
	Recorder using Type A communications method. (The Digital Video Recorder’s Camera
	Protocol: TOA-A)
TOA-B	: Select this model when connecting TOA’s Combination Camera to the Digital Video
	Recorder using Type B communications method. (The Digital Video Recorder’s Camera
	Protocol: TOA-B)
BOSCH	: Select this model when using BOSCH’s Combination Camera in conjunction with the Digital
	Video Recorder.
PELCO-D	: Select this model when using PELCO’s Combination Camera in conjunction with the Digital
	Video Recorder.

Some functions or operations are not available depending on the communications method. Determine the communications method referring to the following table.

TOA-A

(Type A)

TOA-B

(Type B)

Iris key

Position 0 *1

AUTO key

*2

*3

*1 Operation for returning the camera to home position. Enter 0, then press the POS key.

*2 Begins and terminates operations set in the Combination Camera’ s “Auto Function” settings with each depression of the key. (Refer to p. 22 ; Auto Function Operations.)

*3 Begins auto pan operation when pressed, and terminates all auto operations when pressed again during auto pan operation.

Note

As shown below, TOA’s Combination Cameras are divided into two groups: one using the Type A (TOA-A) communications method and the other using the communications method of both Types A and B (selectable by DIP switch). The communications method is factory-preset to Type A (TOA-A).

For the DIP switch position and settings, refer to the setup manual enclosed with the Combination Camera.

TOA-A (Type A)	: C-CC501, C-CC504, C-CC551, and C-CC554
TOA-A/B (Types A/B selectable)	: C-CC514, C-CC564, C-CC714, and C-CC764

45