TOA Electronics C-RM1000 CU operating instructions Definition Digital Video Recorder number DVR

Page 9

Definition

Digital Video Recorder number (DVR):

Refers to the DVR-ID number when the Digital Video Recorders are cascade- connected.

Monitor number (MON): Refers to the Digital Video Recorder's monitor output number. There are two monitor outputs: Monitor outputs 1 and 2.

Camera number (CAM): Refers to the camera video input terminal number connected to the Digital Video Recorder.

Position number (POS): The Combination Camera's orientation can be programmed into a number (1 – 255).

Group number (G): Multiple cascade-connected Digital Video Recorders can be grouped. Up to 8 groups can be set.

Group sequence: A sequence of images from multiple Digital Video Recorders in the same group can be displayed on the master monitor.

Cascade connection: Images of up to 8 Digital Video Recorders can be monitored on a single monitor. Images of up to 8 Digital Video Recorders can be switched and cameras can be controlled by a single Remote Controller. (Refer to p.54; Expanded Digital Video Recorder system, (Cascade-connection.))

Priority Recording: Refers to the highest Priority Recording mode. Press the unit's Priority Recording key to start recording.

Alarm Event Recording: Refers to the Alarm Recording and Motion-detected Recording.

Alarm Recording starts when an alarm signal enters an alarm input terminal of the Digital Video Recorder or Combination Camera. Motion-detected Recording starts when the Digital Video Recorder detects the movement of the camera images.

Alarm hold:The monitor display automatically switches when an alarm signal is received. The Alarm Hold refers to the mode that prevents the screen from being switched. Digital Video Recorder's Alarm Event Recording is performed even in Alarm Hold mode.

Multi-segment split screen display:

Refers to the 4-segment, 9-segment, or 16-segment split screen.

Live mode:Refers to the mode that displays the current camera images.

Playback mode: Refers to the mode that displays images recorded on a hard disk.

Triplex mode: Refer to the mode that simultaneously displays both playback and live screens. Playback, live display, and video recording can be simultaneously performed.

Communication method: There are two types, A (TOA-A) and B (TOA-B). Operable functions differ depending on the type. The camera, Digital Video Recorder and Remote Controller must be identical in communication method. (Refer to p. 45; Camera Protocol.)

Auto-function:Auto-pan, Auto-trace, Preset sequence, and Tour. (Refer to p. 22; Auto-function Operation.)

Monitor Lock: Restricts operable monitors connected to the digital video recorder’s monitor outputs 1 and 2. This eliminates the necessity of operation for switching the monitors and prevents malfunctions.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operating Instructions Remote ControllerTable of Contents SettingsGeneral Description Digital Video Recorder Operation OperationConnections When YOU Need HelpSafety Symbol and Message Conventions Safety PrecautionsWhen Installing the Unit When the Unit is in UseModifications Functions Equipment that can be controlled by the Remote Controller Handling PrecautionsConnectable Equipment and Their Maximum Numbers DR091 and C-DR161 Series Digital Video RecordersMulti-segment split screen display Definition Digital Video Recorder number DVRNomenclature and Functions Playback mode Joystick Live modeMenu display mode Focus Key Focus Live modeRear Panel AC Adapter Power Input Terminal DC in 13.8Bottom Surface Indications DVR Control Output Terminal B screwless typeDigital Video Recorder Selection Equipment SelectionMonitor Selection Group Selection cascade connection onlyCamera Selection Press the Full key Designated cameras image is displayed on Full Screen DisplayFull screen and the Full key lights. The camera Number is displayed on the LCD screenSegment Split-Screen Display Multi-Screen DisplaySegment Split Screen Display Sequential Display Changing the Multi-Screen Display PositionGroup Sequential Display Zoom Display Electronic zoom Camera Rotation and Zoom Operation Using the Joystick Focus AdjustmentCombination Camera Operation Iris Operation Communication method Type B only Auto-Function OperationCamera Position Selection Focus Speed Settings Utilization of the Abbreviation Number FunctionCombination Camera Menu Display Example Storing the Preset PositionsVideo Recording Digital Video Recorder OperationLED indication during recording Priority recording operationPlayback mode settings Resetting alarm event recordingPlayback Operation Making normal recordingForward/reverse quick playback Stop operationTime skip forward/reverse playback Pause operationFrame advance/reverse playback Instant event access playbackEarliest image playback Latest image revers playbackDigital Video Recorder Menu Display Search OperationArchiving Motion Detection Area SettingsTriplex Settings Entering the Digital Video Recorder Password Log-inLog-out Log-In and Log-Out Other OperationsAlarm Operations When alarm is triggeredAbbreviation Number To reset alarm Putting screen switching on hold when an alarm occursTo stop a buzzer tone Password Setting Item SummariesYES TOA-A TOA-B Bosch PELCO-D Remote controller menu listSetting Keys and Display Screen Keys to be used for settingsLCD screen display Displaying the menu Basic Setting OperationsOperation during menu display Closing the menuGroup settings Function SettingsSetting contents When selecting Setting …When selecting Transfer… When selecting Erase…Abbreviation Setting contents Abbreviation Quick display function Abbreviation Function programming When the cameras protocol is TOA-A Type aDefault abbreviation number settings When the cameras protocol is TOA-B Type BTOA-A Camera ProtocolOperation Level Pattern Passwords and operation levelsPassword Settings Focus speedBuzzer tone Key operation tone 12.4.10. I/O SpeedDVR check N I T O R L O C K Language Joystick position adjustmentInitial status ExpansionCombination camera Equipment ConnectionsDigital video recorder Interface unitBasic system System ExampleInterface Unit C-RF1000 Expanded Digital video recorder system Cascade-connectionRemote Controller connections using the dedicated cable Remote Controller Indication and Status Digital Video Recorder Failure IndicationStopping the buzzer tone Troubleshooting Equipment selection Operation GuideOther operations Specifications AccessoriesOptional products
Top Page Image Contents