TOA Electronics C-RM1000 CU Digital Video Recorder Failure Indication, Stopping the buzzer tone

[Cable length extension between the Remote Controller and Digital Video Recorder]

Power to the Remote Controller is supplied from the AC adapter.

The maximum cable length is 1.2 km (3,937 ft) for distance between the Remote Controller and the Digital Video Recorder of which termination switch is set to ON.

			Termination switch: OFF			Termination switch: OFF			Termination switch: ON
	Remote			Digital Video			Digital Video			Digital Video
	Controller			Recorder			Recorder			Recorder
		Screwless	Screwless		Screwless	Screwless		Screwless	Screwless
		terminal	terminal		terminal	terminal		terminal		terminal
AC adapter
required				CPEV-S larger than AWG22 (Ø0.65 mm)

Note: Do not connect the supplied modular cable.

14. DIGITAL VIDEO RECORDER FAILURE INDICATION

The Digital Video Recorder's failures can be confirmed at the Remote Controller.

14.1. Remote Controller Indication and Status

: Flashes red

LCD Screen		ALARM RESET	Buzzer *	Digital VideoRecorder Failure Status
		Key
				A hard disk error, video loss or fan failure has occurred at the Digital Video
F A I L U R E				Recorder number displayed on the LCD screen. Check the Digital Video
				Recorder’s failure log to take appropriate steps. For details, please read the
D V R	1
				Digital Video Recorder’s instruction manual.
H D	F U L L			The hard disk of the Digital Video Recorder number displayed on the LCD
				screen is full. Check the Digital Video Recorder’s failure log to take
D V R	1
				appropriate steps. For details, please read the Digital Video Recorder’s
				instruction manual.

* Available when the Remote Controller’s buzzer settings are set to ON.

Note

When the Digital Video Recorder recovers from the failure, the Alarm Reset key lights to indicate the occurrence of an error. Hold down the key for 2 seconds or more to extinguish it.

14.1.1. Stopping the buzzer tone
Press the Alarm Reset key to stop the buzzer tone.	BUZZER STOP
	RESET

56