TOA Electronics C-RM1000 CU operating instructions Abbreviation Function programming

Page 43

12.4.4. Abbreviation (Function programming)

The functions of the Combination Camera and Digital Video Recorder can be programmed into an abbreviation number (1-508 and F1-F4 keys).

Note

The Combination Camera's protocol must be selected before performing abbreviation number settings. If the protocol is selected, this permits the available functions to be selected for the camera.

1.Select [ABBREVIATION] while the menu is displayed and press the SET key.

2.Select [1. SET] and press the SET key.

3.Enter an abbreviation number and press the SET key.

Use numbers 1-508. The F1-F4 keys can be selected with the joystick. Pressing the SET key moves the flashing cursor to the second line.

4.Select the function to be programmed and press the SET key.

Functions that can be set are as shown in the table below.

5.To continue to set abbreviation numbers, repeat Steps 3 and 4. To return to the setting item display, press the C key.

When the camera's protocol is TOA-A (Type A)...

Function Name	Description

D M C P	Quick display setting screen
DVR NAME DISPLAY	DVR Name display

DVR NAME HIDE	DVR Name hide

ZOOM ON	Zoom ON

ZOOM OFF	Zoom OFF

AUTO FOCUS	Auto focus

AUX1 ON	Contact 1 ON

Function programming screen

S E T			Abbreviation Nos.
		1	1-508 and F1-F4

A U T O	F O C U S
	Function name

Function Name	Description

AUX1 OFF	Contact 1	OFF
AUX2 ON	Contact 2	ON

AUX2 OFF	Contact 2	OFF

AUTO PAN	Auto pan start

PRESET SEQUENCE	Preset sequence start

AUTO TRACE	Trace start

FUNCTION A-Z	Cannot be used

43

Image 43

Contents Operating Instructions Remote ControllerSettings Table of ContentsGeneral Description Digital Video Recorder Operation OperationConnections When YOU Need HelpWhen the Unit is in Use Safety PrecautionsSafety Symbol and Message Conventions When Installing the UnitModifications Functions DR091 and C-DR161 Series Digital Video Recorders Handling PrecautionsEquipment that can be controlled by the Remote Controller Connectable Equipment and Their Maximum NumbersMulti-segment split screen display Definition Digital Video Recorder number DVRNomenclature and Functions Focus Key Focus Live mode Joystick Live modePlayback mode Menu display modeDVR Control Output Terminal B screwless type AC Adapter Power Input Terminal DC in 13.8Rear Panel Bottom Surface IndicationsGroup Selection cascade connection only Equipment SelectionDigital Video Recorder Selection Monitor SelectionCamera Selection Number is displayed on the LCD screen Full Screen DisplayPress the Full key Designated cameras image is displayed on Full screen and the Full key lights. The cameraSegment Split-Screen Display Multi-Screen DisplaySegment Split Screen Display Sequential Display Changing the Multi-Screen Display PositionGroup Sequential Display Zoom Display Electronic zoom Focus Adjustment Camera Rotation and Zoom Operation Using the JoystickCombination Camera Operation Auto-Function Operation Iris Operation Communication method Type B onlyCamera Position Selection Utilization of the Abbreviation Number Function Focus Speed SettingsCombination Camera Menu Display Example Storing the Preset PositionsPriority recording operation Digital Video Recorder OperationVideo Recording LED indication during recordingMaking normal recording Resetting alarm event recordingPlayback mode settings Playback OperationPause operation Stop operationForward/reverse quick playback Time skip forward/reverse playbackLatest image revers playback Instant event access playbackFrame advance/reverse playback Earliest image playbackDigital Video Recorder Menu Display Search OperationArchiving Motion Detection Area SettingsTriplex Settings Log-in Entering the Digital Video Recorder PasswordLog-out Log-In and Log-Out Other OperationsWhen alarm is triggered Alarm OperationsAbbreviation Number Putting screen switching on hold when an alarm occurs To reset alarmTo stop a buzzer tone Password Setting Item SummariesYES TOA-A TOA-B Bosch PELCO-D Remote controller menu listKeys to be used for settings Setting Keys and Display ScreenLCD screen display Closing the menu Basic Setting OperationsDisplaying the menu Operation during menu displayWhen selecting Setting … Function SettingsGroup settings Setting contentsWhen selecting Erase… When selecting Transfer…Abbreviation Setting contents Abbreviation Quick display function Abbreviation Function programming When the cameras protocol is TOA-A Type aDefault abbreviation number settings When the cameras protocol is TOA-B Type BTOA-A Camera ProtocolOperation Level Pattern Passwords and operation levelsFocus speed Password SettingsBuzzer tone 12.4.10. I/O Speed Key operation toneDVR check N I T O R L O C K Expansion Joystick position adjustmentLanguage Initial statusInterface unit Equipment ConnectionsCombination camera Digital video recorderBasic system System ExampleInterface Unit C-RF1000 Expanded Digital video recorder system Cascade-connectionRemote Controller connections using the dedicated cable Digital Video Recorder Failure Indication Remote Controller Indication and StatusStopping the buzzer tone Troubleshooting Equipment selection Operation GuideOther operations Accessories SpecificationsOptional products