TOA Electronics C-RM1000 CU operating instructions Storing the Preset Positions, Example

9.9. Storing the Preset Positions

The preset position can be stored on the camera menu, however it can be easily stored by performing the following operation;

1.	Select the camera for which the preset position is
	programmed. (Refer to p. 13; Equipment Selection.)
2.	Rotate the Combination camera to set it to the desired
	angle of view.
3.	Enter a preset position number using the ten-key numerical
	pad.

[Example]	LCD screen
3	3
	7	1	1 5

4. Press the SHIFT key.

The key lights.

MENUMENU

SHIFTSHIFT

Lights

5. Hold down the POS key for 2 seconds or more.

The “PRESET MEMORY” indication is displayed on the

LCD screen.

POS	LCD screen
	P R E S E T M E M O R Y

9.10. Deleting preset position data (Communication method: Type B only)

Preset position data can be deleted by performing the following operations.

1.	Enter the preset position number to be deleted using the
	ten-key numerical pad.
2.	Press the SHIFT key.

[Example]	LCD screen
3	3
	7	1	1 5

The key lights.

3. Hold down the C key for 2 seconds or more.

MENUMENU

SHIFTSHIFT

Lights

The “PRESET ERASE” indication is displayed on the LCD

screen.

LCD screen

C P R E S E T E R A S E

24