TOA Electronics C-RM1000 CU Key operation tone, 12.4.10. I/O Speed, DVR check

Page 49

12.4.9. Key operation tone

The tone generated whenever the key is pressed can be set to sound or not to sound.

1.Select [KEY CLICK ON/OFF] while the menu is displayed and press the SET key.

The setting content is displayed on the second line.

2.Select the setting content and press the SET key.

[Setting Contents]

K E Y C L I C K O N / O F F

1O N

1.

ON

The key operation tone is sounded when the key is pressed.

 

 

 

2.

OFF

The key operation tone is not sounded when the key is pressed.

 

 

 

(Factory-preset to ON.)

12.4.10. I/O Speed

Set the DVR control output terminal's transmission rate. (Factory-preset to [38400].)

1.Select [I/O SPEED] while the menu is displayed and press the SET key.

2.Tilt the joystick to the left or right to select the transmission rate: [9600], [19200] or [38400].

I/ O S P E E D

3 8 4 0 0

Note

Set the same transmission rate for the components connected to the control terminal. The Digital Video Recorder (C-DR091 and C- DR161 Series) and the C-RF1000 Interface Unit are factory preset to 38400 bps.

3. Press the SET key to confirm the selected transmission rate.

12.4.11. DVR check

Check the Digital Video Recorder connected to the control terminal.

Select [DVR CHECK] while the menu is displayed and press the SET key.

The connected Digital Video Recorder number is displayed.

Note

Performing the DVR check during cascade connection displays all connected Digital Video Recorder numbers. If the number of the connected Digital Video Recorder is not displayed, communications may not have been established. In such cases, check to see if:

I/ O S P E E D

1 9 2 0 0

D V R C H E C K

The connection terminal is correctly connected.

The Remote Controller’s transmission rate matches that of the Digital Video Recorder.

The Digital Video Recorder’s DVR-ID number is correctly set.

49

Image 49
Contents Operating Instructions Remote ControllerSettings Table of ContentsGeneral Description Digital Video Recorder Operation OperationConnections When YOU Need HelpSafety Symbol and Message Conventions Safety PrecautionsWhen Installing the Unit When the Unit is in UseModifications Functions Equipment that can be controlled by the Remote Controller Handling PrecautionsConnectable Equipment and Their Maximum Numbers DR091 and C-DR161 Series Digital Video RecordersMulti-segment split screen display Definition Digital Video Recorder number DVRNomenclature and Functions Playback mode Joystick Live modeMenu display mode Focus Key Focus Live modeRear Panel AC Adapter Power Input Terminal DC in 13.8Bottom Surface Indications DVR Control Output Terminal B screwless typeDigital Video Recorder Selection Equipment SelectionMonitor Selection Group Selection cascade connection onlyCamera Selection Press the Full key Designated cameras image is displayed on Full Screen DisplayFull screen and the Full key lights. The camera Number is displayed on the LCD screenSegment Split-Screen Display Multi-Screen DisplaySegment Split Screen Display Sequential Display Changing the Multi-Screen Display PositionGroup Sequential Display Zoom Display Electronic zoom Focus Adjustment Camera Rotation and Zoom Operation Using the JoystickCombination Camera Operation Auto-Function Operation Iris Operation Communication method Type B onlyCamera Position Selection Utilization of the Abbreviation Number Function Focus Speed SettingsCombination Camera Menu Display Example Storing the Preset PositionsVideo Recording Digital Video Recorder OperationLED indication during recording Priority recording operationPlayback mode settings Resetting alarm event recordingPlayback Operation Making normal recordingForward/reverse quick playback Stop operationTime skip forward/reverse playback Pause operationFrame advance/reverse playback Instant event access playbackEarliest image playback Latest image revers playbackDigital Video Recorder Menu Display Search OperationArchiving Motion Detection Area SettingsTriplex Settings Log-in Entering the Digital Video Recorder PasswordLog-out Log-In and Log-Out Other OperationsWhen alarm is triggered Alarm OperationsAbbreviation Number Putting screen switching on hold when an alarm occurs To reset alarmTo stop a buzzer tone Password Setting Item SummariesYES TOA-A TOA-B Bosch PELCO-D Remote controller menu listKeys to be used for settings Setting Keys and Display ScreenLCD screen display Displaying the menu Basic Setting OperationsOperation during menu display Closing the menuGroup settings Function SettingsSetting contents When selecting Setting …When selecting Erase… When selecting Transfer…Abbreviation Setting contents Abbreviation Quick display function Abbreviation Function programming When the cameras protocol is TOA-A Type aDefault abbreviation number settings When the cameras protocol is TOA-B Type BTOA-A Camera ProtocolOperation Level Pattern Passwords and operation levelsFocus speed Password SettingsBuzzer tone 12.4.10. I/O Speed Key operation toneDVR check N I T O R L O C K Language Joystick position adjustmentInitial status ExpansionCombination camera Equipment ConnectionsDigital video recorder Interface unitBasic system System ExampleInterface Unit C-RF1000 Expanded Digital video recorder system Cascade-connectionRemote Controller connections using the dedicated cable Digital Video Recorder Failure Indication Remote Controller Indication and StatusStopping the buzzer tone Troubleshooting Equipment selection Operation GuideOther operations Accessories SpecificationsOptional products