Technicolor - Thomson TU-HDT104A manual Mode C SD, Cvbs, Installation

Operating Instruction Book

TU-HDT104A

Mode B (HD, RGB)

The switch on the rear of the digital receiver must be in position B, and the AV connections must be taken from the RGB HD15 socket. The digital receiver display will show “Hd r”. Press OK to confirm the selection, or switch to another mode. Proceed to

INSTALLATION.

Mode C (SD, CVBS)

The switch on the rear of the digital receiver must be in position C, and the AV connections must be taken from the CVBS TV RCA socket. The digital receiver display will show “Sdtv”. Press OK to confirm the selection, or switch to another mode. Proceed to

INSTALLATION.

Installation

The on-screen display will ask which type of display device is being used. You will have a choice of either Plasma / LCD (Flat panel displays) or CRT (eg Standard television).

Select from the choices using the remote control keypad. The following screen will ask you to confirm 576i / 576p (depending upon the current mode). Follow the on- screen instructions to test HD576p, HD1152i, HD1080i and HD720p formats.

Note: Not all video formats are available in all modes. The following table describes the available formats in each mode.

10