Operating Instruction Book
Audio Language Priority
From here you may prioritise languages for the audio output. To prioritise a language, press OK to highlight a language choice. Move the choice up or down by using the arrow buttons. Press OK again to confirm the priority.
Note that this priority applies when you view new services. That is, the receiver will select the audio soundtrack with the highest priority as the default soundtrack. However, you may select any available soundtrack at any time for each channel, and that selection will not be affected by your choice of language priority.
Note also that this feature is currently not supported by Australian broadcasters.
Audio Preference
The Audio mode allows you to adjust the audio setting. You may choose Dolby Digital (Dolby D), MPEG1 and MPEG2. Use W/X to select your choice. Like the Audio Language Priority setting, this audio mode setting determines your initial choice of soundtrack based on the audio mode, and you may select any soundtrack channel by channel, regardless of the audio mode setting made in this menu.
If the default Audio Mode is Dolby D, and the input signal contains only MPEG2, the default Mode will change to MPEG2 automatically. If the Audio Mode is set to Dolby D, the digital receiver will automatically select a Dolby D soundtrack when it is available. We especially recommend this selection if you will be connecting your receiver to a TV
or A/V receiver that can decode Dolby Digital (look for the 
logo) or Dolby
Surround Pro Logic (look for the 
logo).
20