Operating Instruction Book
Install
When the receiver is initially set up, conduct a channel search by selecting the “Auto scan channels” function.
zAuto Scan channels
Auto Scan channels provides the easiest way to conduct a channel search. It does not require you to enter any other information. This function is strongly recommended for regular users. However, the user should be aware that all existing channels will be removed as soon as you confirm start of auto scan.
In the Auto Scan channels OSD, all channels found will be listed. The channel search may take a few minutes. If you abort an auto scan during the scan process, some channels may not be available to you.
zManual Channel Search
In the “Manual channel search” window you can set the specific channel to search. Press the left or right button then OK to select the physical channel you wish to search.
Restore shipping condition
If you wish to reset all previous settings, you can use this feature to do so. Once you decide to restore shipping settings, all previous settings will be lost. Please be very careful before you confirm this action.
Select Region
Using W/X you may select your local region: New South Wales, Victoria, Queensland, South Australia, Western Australia, Tasmania, Northern Territory. This setting will allow the digital receiver to display the current time in the
23