Technicolor - Thomson TU-HDT104A manual Information Plate, Changing or Selecting Channels

Operating Instruction Book

TU-HDT104A

5.2Information Plate

The Information Plate (I-Plate) shows information about the program that you are currently watching. The information plate appears briefly whenever you switch to a new channel or when there’s a problem with signal reception. To show the information plate, press the button. Press EXIT to remove the I-Plate from the screen.

Program Guide

The Program Guide is a user-friendly feature, which enables you to select, book, and “peek in advance” at programs. To enter into the Program Guide, press GUIDE. In the Program Guide on-screen display, the program schedule is listed in chronological order.

Section 6.1 of your User Manual will instruct you to use the Program Guide efficiently.

5.3Changing or Selecting Channels

There are several methods to change or select a channel. You can either use the front panel or the remote control buttons.

The following methods are available for you to choose from:

zPress Channel S/T on the remote control (channel changes according to favourite channel settings).

zDirectly enter a channel by using the number keys on the remote control.

zUse to change channel. Unlike Channel S/T control channel movement is not aligned with favourite channels setting.

zUse to toggle between current channel and previously watched channel.

zSelect channels from the Mosaic interface. You have to first browse the Mosaic channel by pressing the Mosaic button on the remote control. Note that Mosaics are currently not used in Australia.

13