VCR out, Audio delay time | Technicolor

Operating Instruction Book

TU-HDT104A

VCR out

This setting affects the video format at the VCR output, or the TV output when mode C (CVBS) is selected.

If your display is 4:3 format and the transmission of a program happens to be 16:9, the Normal/Letterbox mode will give you a complete picture, but black areas will appear at the top and bottom.

Letterbox

Alternatively you can choose the Normal/Center Cut mode to play the program in a full-screen format, however information on the left and right sides may be cut off.

If your display is 16:9 format, then set the mode at Wide. If a program happens to be in 4:3, black areas will appear at the left and right of the screen in order to present the picture in a correct aspect ratio.

Note that this selection only applies to CVBS output.

Audio delay time

Center Cut

16:9 Wide

Different displays may have different delay in displaying pictures, which may cause a slight problem with lip sync. This feature allows you to use W/X to select your choice according to your actual video display equipment, in order to compensate for this delay. The delay time depends on which choice appears to provide best performance of lip sync on your display device.

MPEG Audio Level

From here you my adjust MPEG audio level from –12 db to 0 db. This adjustment is only for MPEG input and system will detect MPEG input automatically.